
UNSOLVED
Closed
White led blinking
My new XPS13 7390 behaves a little strangely - the status led in the front of the laptop randomly blinks white light, in no apparent pattern. I read that if there are also orange blinks, it can indicate a hardware problem. But I only have white blinks. What does this mean? Is there some way to stop it from happening? I find it extremely distracting.
3 people also have this problem
Responses (11)
Solutions (0)
@Mary G , thank you for your reply. I have read the manual before and all the blinks it describes include an amber light blinking. As I have mentioned in my initial post, I do not see any amber lights. This is a 60 second sample of the blinks:
- @DELL-Cares how to stop this?
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
15800
0
Posted July 20th, 2020 06:00
jdesilva2,Which light is blinking white?Jesse L (retired)
Another thing I just noticed is that my computer will not power on unless that light is on. If I press the power button while the light is off nothing happens, but is I press the power button during the 3 seconds the light is on the computer powers on.
Hi Jesse,
It is the same light as seen in the video posted above. It's the power/status indicator light. When I shut down the laptop the power/status indicator light blinks white. The manual only talks about errors when it's blinking white/amber but there is no amber. It is a slow blink, the light stays on for about 3 seconds then is off for about 20 seconds or so then is on for 3 seconds. It stays like that the entire time the laptop is shut down.
Jason
Jesse L (retired)
10 Wizard
•
17898 Posts
•
69016 Points
15791
0
Posted July 20th, 2020 08:00
jdesilva2,
It sounds like the system is in sleep/hibernate mode.Can you verify that the system is shutdown?
Jesse L (retired)
DELL-Cares
Moderator
•
27855 Posts
•
781 Points
3670
0
Posted July 20th, 2020 09:00
jdesilva2,Disable Fast Startup by following the steps.How to disable Fast startup in Windows 10 OS- Open “Control Panel” and click “Power Option”,
- Click “Choose what the power buttons do”
- Click “Change settings that are currently unavailable”
- Disable “Turn on fast startup”
Change the power plan
To change the power plan in Windows 10, perform these actions:
- Start
, then type "sleep".
- Select Power and Sleep settings, then select Additional power settings at the bottom of the screen.
The Power Options window appears. - Select Balanced (recommended), Power saver, or select Create a power plan on the left side of the screen.
- Customize your plan settings as desired.
#IWork4Dell
For all non-technical issues that require your private data, we must communicate via a private Direct Message
Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice

Mary G
6 Operator
•
20095 Posts
15062
0
Posted June 15th, 2020 08:00
Check your manual https://topics-cdn.dell.com/pdf/xps-13-7390-laptop_setup-guide_en-us.pdf
Lights status is in the Service Manual- https://topics-cdn.dell.com/pdf/xps-13-7390-laptop_service-manual_en-us.pdf