So this is my battery report, but also when the battery comes to 0% after 2 hours of use in windows, it keeps on working for another hour or so at 0%
How can I recalibrate this?
TNX
SYSTEM PRODUCT NAME Dell Inc. XPS 15 9575 BIOS 1.13.0 07/15/2020 OS BUILD 19041.1.amd64fre.vb_release.191206-1406 PLATFORM ROLE Mobile CONNECTED STANDBY Not supported REPORT TIME 2021-01-2711:02:15 Installed batteries Information about each currently installed battery BATTERY 1 NAME DELL TMFYT84 MANUFACTURER BYD SERIAL NUMBER 196 CHEMISTRY LiP DESIGN CAPACITY 75,001 mWh FULL CHARGE CAPACITY 32,935 mWh CYCLE COUNT -
I wish Dell would address these issues, and not dance around them, hoping that the users solve it for them
The same thing happened initially with this laptop having huge problems with Panel Self-Refresh option, as it did not work properly, and actually messed the laptop on HW level to where it would lose connection to the LCD screen in BIOS!
I will mark this as solution, as the battery does not need to be replaced, but rather something on the HW level or in BIOS needs to be fixed by Dell, so the battery doesn't fail after Sleep state.
Well, I went ahead and let it run all the way down, and now it is reported as this.
DESIGN CAPACITY 75,001 mWh FULL CHARGE CAPACITY 38,771 mWh
So now there is about 50%, and battery lasts about 3 hours. It does not look swollen or anything, so I guess once it goes down to about 1/3, I will buy a new one. I reside in Turkey, and it is hard to get parts here. Once someone is going to USA, I will get the new one
Until then, hopefully it will hold for around 2-3 hours.
New info: So I have disabled the Laptop Sleep in bios, and was just using Adaptive battery settings for a few days. The battery recovered to Excellent again. There is definitely an error in this machine and windows 10. Because every time my battery was acting up, it was after the sleep state.
I have the same problem with Latitude E5470 and Latitude 5480. With 5480 this thing happened when I updated to the latest BIOS (as well with "TPM 2.0 not found" error). The Latitude's E5470 battery was changed to new, and after reaching 30% battery level and somewhere below - it will instantly go to 7% and then after charging, it will add up 3 to 4% of battery wear level! Battery is brand new, never gone below zero and it just needed few times where the battery was below 30% to have now -10.1% OUT OF BATTERY FULL CAPACITY! My speculation is that DELL is doing this on purpose, so People would want to throw out their old laptops and buy the new ones! This is unacceptable! Any way you found out a real solution to this problem?
If you look up article 000146598 you can see that the video card drivers were causing excessive and erratic battery drain. I purchased the premium warranty from Dell however that does not cover batteries. I keep calling different people trying to explain that the battery issue stems from the bad video card driver not the one year expiration of all batteries.
I suggest you all call as many times as possible, If they do not either replace my battery for free or refund my extended warranty I will burn the current dell produce so that nobody else can support this crooked company
Unfortunately I do not live in the USA, so I am stuck with trying to solve it. Thank you for the article page, I did update the drivers for AMD and Intel, so after another battery reset, I wonder how it will go...
dadach
19 Posts
1996
0
Posted February 4th, 2021 01:00
I wish Dell would address these issues, and not dance around them, hoping that the users solve it for them
The same thing happened initially with this laptop having huge problems with Panel Self-Refresh option, as it did not work properly, and actually messed the laptop on HW level to where it would lose connection to the LCD screen in BIOS!
I will mark this as solution, as the battery does not need to be replaced, but rather something on the HW level or in BIOS needs to be fixed by Dell, so the battery doesn't fail after Sleep state.