OK, I have tried almost every proposed fix posted here, and none worked for me, of if they did, it was a temporary sort of deal, it came back.
Disclaimer, I am on BIOS V2.13.1 with the latest Nvidia posted drivers installed via GeForce using the CLEAN INSTALL option. I've not had a lock up since the middle of last year, maybe August 2023.
I have no tried installing any NEWER Dell BIOS since the V2.13.1 as I'm unwilling to 'gamble' that if it should not work and I'd be getting Lock ups, going back might not stop them.
What I've start to realize is that there are a lot of 8940 Configurations out there, as well specifically Nvidia cards, both purchased with the 8940 and later added from 3rd party MFG.'s. Dell's models are supposedly all made by MSI for Dell, but from pictures I've seen of the model I have and MSI sells, physically, either respect to Fans at least, they are clearly different. Speculation is that Dell has some other changes that reduced the power requirement (like on my RTX2060 which has 1 larger fan, the MSI version has 2 smaller ones).
Also, recently, a friend on Linux Arch, also with an Nvidia card has had the same lock up problems as we've had on Windows. He discovered that turning OFF Turbo in the BIOS gave him some stability, but with system updates and some other changes it came back, especially when he install BIOS V2.17.0. Well, in the last few days he decided to switch the Nvidia Driver from a Linux one to another version maker available. Still on BIOS V2.17.0, and has been stable for days.
Now with that in mind, I know a lot of 'stuff' is installed along with the Nvidia Driver. Please take a look here, https://www.techpowerup.com/nvcleanstall/ as it is a 3rd party utility that has some interesting aspects to it.
I do have it on my XPS, but have NOT used it. I am NOT reconsidering doing and even getting BIOS V2.17.0 based on how my friend on Linux made out?
When you run it, it will look like this and there is an explanation of all the choices, like this one I chose to show what it states for USB-C driver included in the stock Nvidia Driver Install package:
Now I'd assume most XPS8940's do not have USB-C connectors. So do they need that driver and/or can it cause a problem and a lock up at some point. Going through the list, I see 6 or so I probably don't need to have or do not apply to me.
One other point that might be tied to the above program. Dell 'semi-official' answer, "Use only Dell posted Nvidia drivers"... well, I've had fails with those too, but some other users have posted they do not? Could Dell have 'stripped out some parts like the above program will? Dell has never stated WHY you must use their posted drivers, and when you do have a problem, even Dell Support (at least for me) instructs one to try the latest Nvidia Released drivers.
Unfortunately for a majority of users with Nvidia cards getting lock ups, Dell has done nothing. They did offer to 'capture' my XPS but the terms of the 'trade' and restrictions I had to follow made me decline the offer, and others did too. To my knowledge Dell never recreated the problem either.
So, I am still not willing to go up in BIOS level, even with the program that would strip out non-needed sub-parts.
However, I offer this up to you as a possible 'thing to try'.
I am not sure that going up to BIOS V2.17.0 would offer any value to me? I know I'll miss some Security upgrades, but since I do back ups of my disks, it is something I'm willing to do. More important to get Nvidia fixes I feel as I am always on the last one Nvidia posted.
NOTE: If you intend to do this, use NVINSTALLCLEAN, I'd use DDU first to remove all parts of the Install Nvidia Driver before using the program to install the driver, old parts you don't want might still be there if you do not remove them with DDU.
Well talk about bad KARMA!!!! Today, a few hours after posting this, I got a LOCK UP!!!
No changes made I can find, some installs, but none today, or Windows Update either?
Went out, came home, screen black (set to power off after 20 minutes) and I could not wake the XPS up? Keyboard alive as was the mouse, but it just didn't wake up. Powered off with the power button, only error in the Event Viewer (as usual).
Would not come on (as usual as well), the power button turned on, so did the DVD led flash and the power button went off. Tried the power button again, get the Windows Recovery screen as I tried to boot too many tines (set to 1 in BIOS), so I just had it reboot, every thing came up and is fine....
I'm not getting lock ups, I am getting this a few times a week now
Idle power management features on processor 6 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware.
Oh, Gotcha on that... Yes, but if you'd look further, it was in reference to Nvidia's driver for a specific set of video cards (or at least that was the comment on that program I took a snapshot of), the GeForce 20 cards which I do have one of. I assume that other Nvidia cards would not install that driver if they had other cards, but one can never be sure.
As you can see, I happen to have that controller loaded according to Device Manager:
That isn't a problem as I don't use that connector (yet).
Now one could blame my specific problem with lock ups to that driver, and a long time ago when this first started on 2022 (or was it 2021?) Lenovo PC had a similar problem with lock ups. It was traced to the Nvidia Type-C driver and a change was made by Nvidia for it.
However, that driver supposedly is only installed on 20xx cards. Other Nvidia cards have the problem and even Unix users with drivers like that are not installed.
So, yes, I was wrong, the base 8940's do have the Type-C ports, but may not have the ports on the cards that are not 20xx Nvidia cards.
Do you have an Nvidia Card? If so, do you use the Type-C port on it? Could be part of the problem there?
I would assume though your using the Front one though.
However, if you do have an Nvidia card, then its driver does or might load the Nvidia Type-C driver and that could be a problem for you?
In the case you have that video card, you probably have a few options here:
Disable that driver and reboot and test.
Use DDU to remove the Nvidia Driver completely, and then re-install the driver but check CLEAN INSTALL and do a CUSTOM install and make sure the C port driver is unchecked.
Both should accomplish the same thing, remove the Nvidia support for Type-C. It is possible you do have other problems though, as I'd think the Nvidia driver is just too handle the port on the video card, but you can never be sure it doesn't replace or hook into the Windows driver.
Just to clarify, my own 8950 has been great even with the original Dell image but I have since reloaded it fresh.
The 8940 is not mine and it's on the latest bios and Dell nVidia Studio driver and really not having issues except when you try and use that USB-c and an NVMe drive.
I am looking forward to nVidia's new app which replaces GF Experience and no more forced login to nVidia.
ispalten
7 Practitioner
•
2652 Posts
•
9776 Points
0
0
Posted March 7th, 2024 21:33
Well talk about bad KARMA!!!! Today, a few hours after posting this, I got a LOCK UP!!!
No changes made I can find, some installs, but none today, or Windows Update either?
Went out, came home, screen black (set to power off after 20 minutes) and I could not wake the XPS up? Keyboard alive as was the mouse, but it just didn't wake up. Powered off with the power button, only error in the Event Viewer (as usual).
Would not come on (as usual as well), the power button turned on, so did the DVD led flash and the power button went off. Tried the power button again, get the Windows Recovery screen as I tried to boot too many tines (set to 1 in BIOS), so I just had it reboot, every thing came up and is fine....
Just my luck.... sigh....