UNSOLVED

Dr_Bob-2015

updated

11 years ago

0

7335

July 8th, 2015 03:00

Wyse WT9450XE factory reset

Wyse WT9450XE factory reset

I have a WT9450XE that I need to do a factory reset on. I can still log into the XPe OS under user and admin. I have tried creating a USB firmware pusher via the oldest USB Firmware Tool and when trying to boot from it, I receive "Remove Media and restart PC."
I was told to have the boot to USB-ZIP option first in the boot order in the BIOS to make it boot from USB drives. Is that correct? Do I need a legacy USB Firmware tool or legacy WDM to flash this bad boy?

  • Rmontalvo1

    623 Posts

    410

    0

    Posted July 8th, 2015 03:00

    Dr.Bob,
    The USB Firmware Tools has never been tested with the WT9450XE. In those days, the imaging utility was called WSI and it can be found, with documentation, at www.wyse.com/downloads under the RETIRED section.

     

     


    Roger Montalvo 
    Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
    Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums
    [SIGPIC][/SIGPIC]