We have around 110 units in a factory/office area with multiple Vlans and Group assigns. 50% of them have stopped responding to the server. The only way to get them respond again is factory reset the unit. If you open WMS Manager on the unit it comes with error "Cant connect to server, Please try again later"
It only runs a RDP witch works perfectly. Internet works.
The Dell Wyse Management server is running the following version.
The clients varies in models and OS versions. Not all OS Versions in picture are in use.
We have tried to update units. Not working always. We have tried to change VLAN assignment but they have same problem. One unit can be fine and other one just beside it have the problem. The same model, same OS version, same Network/Switch.
They can work for 1 week or 10 weeks and then it happens.
1) You should not see anything in that Services section, you have some content in the advanced section which is a problem. It should be clear, like below
2) Go into each group in the hierarchy and make sure you choose"Reset Policy", but only in the WMS Settings section until you no longer see what you see in the screenshot you sent me. (See below)
3)Factory default a device, allow it to auto discover, register with WMS, does it eventually turn that CA Validation flag in and stop checking in?
Can you post screenshots of the system /event log on the device?
Also can you post screenshots of the Central Management, WMS Settings from the device.
Almost every time I see this, it is due to the advanced setting under WMS settings on the device for "Validate Server certificate" being checked, when a self signed cert is in use.
If you are using DHCP Option tags, or DNS_SRV records to have the device automatically check into WMS, make sure the CA Validation setting is set to FALSE
If you have confirmed you are NOT using DHCP OT or DNS_SRV and are NOT telling the device manually to use CA Validation, then your settings in your WMS policy need to be examined. Best way to confirm this, register the device to a group that does NOT have a policy attached to it.
Most of the time, what I see is customers go into a ThinOS 9 policy in WMS, go down to the WMS section, click advanced, then click out of it. Unfortunately, this leaves some ghost policies in place which enables the CA Validation. The device checks in successfully gets the policy and is then told by the policy to validate CA, which it cannot since it is self-signed, and the device drops out.
You can see the effective settings in a policy by viewing it from the group. You should NOT see anything inthe Services section for WMS, if you do...Bingo
Sounds good. You can probably get away with unchecking the box under WMS Settings for "Validate CA Certificate" on other devices instead of factory defaulting them.
DELL-Scott H
Moderator
•
1074 Posts
•
5044 Points
1770
0
Posted February 13th, 2023 06:00
Ok. I have seen this before.
1) You should not see anything in that Services section, you have some content in the advanced section which is a problem. It should be clear, like below
2) Go into each group in the hierarchy and make sure you choose"Reset Policy", but only in the WMS Settings section until you no longer see what you see in the screenshot you sent me. (See below)
3)Factory default a device, allow it to auto discover, register with WMS, does it eventually turn that CA Validation flag in and stop checking in?
DELL-Scott H
#IWork4Dell