Just upgraded to Windows 10 and Microsoft's installer verifies my system and says it's good to upgrade. This should mean all drivers are certified for Windows 10 in theory.
But it turns out the Broadcom Gigabit driver is a major problem in Windows 10, and reading around it seems a number of people have this problem and not just with this model.
Basically if there's a bit of load on the network or sometimes just randomly, the network card just seems to die. Internet connectivity goes to Limited and nothing will fix it other than a reboot. Then it will die again some 5 to 30 minutes later, unless I don't use it and it will stay up.
The driver dates back to 2013 (15.6.1.2) and is the same as supplied for Windows 7. There's no update for the BMC57788 chip beyond that, from anywhere. It seems this is specific to Dell.
I wasn't expecting hardware issues really as the 8300 is a decent and relatively modern spec PC even if it dates from 2010/11. It's been fine running Windows 7, and the spec is way beyond the minimum for Windows 10.
There's a 17.0.0.3 version which is newer from 2014, on Broadcom's site, but while it lists just about every possible BC NIC, it doesn't list 57788, and sure enough it won't install.
Contact Dell support and obviously those "knowledgable" people they hire in India told me the computer is not supported with Windows 10, it is out of warranty and tried to push me to buy a new one, new support, etc. ***!
Lesson learned to never buy this brand ever again, but meanwhile I need to find a resolution as I can't work!
Save it off to your desk top or any place else that is easy to get to
Right click on the driver
Select "Properties"
Click on the "Compatibility" tab
Select "Windows 7" under "run this program in compatibly mode for"
Click "Apply" and "OK"
Double click on the driver to install.
But it did not work.
I called MS this morning his morning, they worked on my computer for an hour and sent me to those idiots at Dell. The Indian guy on the phone said: SIR YOU ARE OUT OF WARRANTY SORRY ! Great customer service this company has. My next computer will be a custom built one. Tired to deal with these off shore guys.
Just to make sure you got the right driver, you need to download the Broadcom Driver version (14.2.07) which downloads as R282233.exe. and is is the Windows 7 Driver for the Onboard Broadcom Network Adapter (Sound crazy, but most people got this to work). The link I gave in my previous post will take you to the download site for that driver.
I will be upgrading to Windows 10 this weekend and I will be happy to let you know if this works for me and how to do it. After doing the upgrade, I will testing the connection and if a replacement driver is needed, I will uninstall the current driver first and try the driver mentioned above. I also know someone who got a newer driver to work, but I will try the above mentioned driver first.
I have already successfully upgraded a HP DV7 Notebook I bought in 2010 and Dell Inspiron Notebook that I bought last December.
As I mentioned before, as a last resort you can always buy a Windows 10 compatible PCI Network Adapter and stick it in a free PCI slot on your computer. You will need to disable the Onboard Network Adapter in the bios first.
There are Windows 10 compatible PCI Network Cards available at Wal-Mart.com, Amazon.com and other outlets. You can google to find a suitable card for your computer/
Installing that driver from the Dell website did the trick. Thanks a lot!
What I had to do is remove the device completely and install the driver using the executable file that comes on the zip file. What I was trying to do before is adding a legacy driver and that did not work.
Yeah I really did not want to spend money to buy a PCI Express LAN card for nothing, this is a much better solution!
I fixed mine too...I went back to 7, which wasn't without its hiccups. I was fortuitous in that I had a system image back up from 3 days before the 10 install.
So my question is....you needed to do nothing? You simply downloaded 10 and were off to the races? I am contemplating another go at it.
I fixed mine too...I went back to 7, which wasn't without its hiccups. I was fortuitous in that I had a system image back up from 3 days before the 10 install.
So my question is....you needed to do nothing? You simply downloaded 10 and were off to the races? I am contemplating another go at it.
mikebrown8183
12 Posts
1601
0
Posted September 3rd, 2015 17:00
You need to download and install the Broadcom Windows 7 Drivers from the Dell website which should work. Please refer to the following link:
www.dell.com/.../DriversDetails
This fix has work for most persons. I plan on upgrading this weekend and I will let you know whether I was successful with that fix..
If that doesn't work, I plan on installing a Windows 10 compatible PCI Network Card and disabling the Broadcom onboard Network Adapter in the Bios.