UNSOLVED

mdnghtdj

updated

18 years ago

M

mdnghtdj

6 Posts

0

11413

June 15th, 2008 01:00

XP Reinstall Fails

Clean HDD, need to reinstall all software. But, during XP Setup, after files load and right before you expect to see the Setup screen gets this Stop message:

"stop 0x0000007e (0xc0000005,0xf952f0bf, 0xf997b208, 0xf997af08 pci.sys - address f9528000. datestamp 3b7d855c"  Have searched high and low, found one reference to needing to "slipstream XP SP 3 into the installation" but have no clue where to begin with that process. Both 98 and ME will install onto this system, but it shipped with XP and I do not understand what can be wrong.

 

System Information:

 

Inspiron B120, 1.4 Gig Celeron, 256 RAM, Windows XP Home, BIOS Flashed to A08.

No new hardware, Computer had virus's, cleaning attempts left XP damaged, trying to reinstall XP Home, but after files are loaded, right before the Setup screen gets blue screen: "stop 0x0000007e (0xc0000005,0xf952f0bf, 0xf997b208, 0xf997af08 pci.sys - address f9528000. datestamp 3b7d855c" and can not resolve. Have deleted partitions now and DFFR goes well with my old ME, can install both 98 and ME, but XP gets same error each time. I am somewhat experienced with Dell support steps and have reached a total dead end. Thank you in advance for your help!

Display Adptr, Mobile Intel 915GM 910 GML Express chipet family

 

  • 315

    0

    Posted June 15th, 2008 03:00

    • If you're not finding anything, you're probably not searching for the right thing. You searching on the  entire string? The memory addresses in the string will vary from machine to machine based on the machine config.  Try searching for the common terms like Stop 0x0000007e pci.sys. I'd also add XP to narrow the search to stop messages for your OS.
    • Not sure about the one thing you found but can't imagine how it would be related to slipstreaming SP3 (which is the process of taking 2 inputs: an XP SP2 install disc plus the Service Pack 3 release and merge 'em to create an XP SP3 install disc)
    • Is more likely a hardware issue somewhere (i know, not easy to narrow down).
      • Before re-trying the install be sure to disconnect any USB ports or other devices not required for the install.
      • You have diagnostics CD to do a memory test?
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    315

    0

    Posted June 15th, 2008 23:00

    pci.sys error probably means the CD has XP or SP1 which caused this error on reinstallation, so you need a CD with at least SP2. Read this tutorial.  I presume it'll work with SP3 instead of SP2.

     

    Otherwsie, a number of sites are still offering SP2, but doesn't look like Microsoft has it any more. If you absolutely need SP2, just be careful where you download it. ;)

     

     

    Ron

    Message Edited by RoHe on 06-15-2008 05:52 PM
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    315

    0

    Posted June 16th, 2008 01:00

    As indicated in my previous post, the problem occurs because the file "pci.sys" on your XP CD won't work with the hardware in your PC.  This was aknown problem with XP and SP1 that was fixed in SP2.

     

    Try this: Go here and ask Dell to send you a (free) XP SP2 (or maybe SP3) CD for your system. Also request the Resources CD too. If if you get the SP2 (SP3) CD, you shouldn't have any trouble reinstalling XP. You will need to download all the drivers for your system including the chipset driver and Desktop System Software (if required for your system).

     

    If Dell won't give you the SP2 (SP3) CD, you can slipstream SP3 onto your XP CD using this method (same site as in my previous post, but he's updated it for SP3).

     

    Ron

  • mdnghtdj

    6 Posts

    315

    0

    Posted June 16th, 2008 01:00

    First of all, thank you for your help!!!

     

    Nothing plugged into the computer except the power cord, System passed onboard hardware diagnostics, do not have CD with Diags for this machine. After Repair and "dirty" reinstall of XP failed, I ran the DOS Debug, Fdisked and and deleted all partitions, Fdisked new partition, Flashed the bios, let XP format, same error. After I put ME on it(that and 98 installs without a problem), I installed Avast antivirus, all scans clean. As I Googled the Stop message, I found this: http://lifehacker.com/386526/slipstream-service-pack-3-into-your-windows-xp-installation-cd, but thats definitly out of my league! Have alreadysearched for just XP,

    stop 0x0000007e   many many results, will keep looking. Thanks again.

  • 315

    0

    Posted June 16th, 2008 02:00

    I agree w/RoHe. If, in fact, you're using an XP SP1 install disk (and sounds like you probably are) that could be the problem source.

     

    Here's an easy way to check:

    Just look at the files in root directory on the install CD. You should see a README.HTM file. Open it. Then click on where it says Important Information About This Version of Microsoft Windows XP

     

    It will tell you what Service Pack is on the CD. If SP1, you need to get SP2 or SP3

    Message Edited by LookinAroundd on 06-15-2008 10:24 PM
    Message Edited by LookinAroundd on 06-15-2008 10:42 PM
  • mdnghtdj

    6 Posts

    315

    0

    Posted June 16th, 2008 18:00

    You guys rock! My Dell XP disk does in fact have SP1 on it, I used the link you provided and requested the SP2 disk and Resource CD from Dell, now am waiting on snail mail. Will repost once I try the XP SP 2 (or 3) installation.