So would the conclusion of this be that I can tell my C: partition to be marked active and then delete my recovery partition using diskpart.exe? sounds too simple so I am hesitant to try it out. Thanks
If you are using windows 7, make sure you first create a system repair disc and that it will boot. You may have to run the repair about three times to rebuild the bcd boot files on the new active partition. Once that is working, then you can delete the recovery partition.
Tom... Not sure if you're still on this forum, but if you are, I have a question related to the answer that you posted here.
I have a Dell XPS-9700 desktop (Manufacture date Dec, 2014). It was preinstalled with Windows 7 Pro on a mSata Solid State Drive. The SSD has 3 Dell partitions: hidden OEM partition (39 MB), Recovery partition (23.7 GB), and OS (C:\) partition (214.7 GB). The Recovery partition is marked System, Active, Primary, so I guess it contains the bootloader that you mentioned above.
If I reinstall Windows 7 in the same location (C:\ partition), will I break the link between the Recovery partition and Windows, rendering the Recovery partition inoperable with F8?
If the Recovery partition becomes inoperable with a reinstall of Windows 7, is there any way around this? I'd like to keep a working Recovery partition, if possible.
If it's not possible, do you recommend deleting the Recovery partition? And if so, should it be done during the Windows 7 reinstall, before, or after?
I made a Dell Rescue Disk (on USB flash drive) and a Dell Factory Backup (on USB flash drive) when I first got the computer. Will both of those restore the original factory image without needing to access the Recovery partition? And, will they restore all 3 of the original factory partitions (OEM, Recovery, OS), or do they just restore the Windows (C:\) image?
Its best to make the Recovery USB with the latest version of Dell Backup and Recovery which has some fixes/enhancements. Instructions are for Windows 8.1 but similar for Windows 7:
After installation of all Windows 7 Updates via the WSUS Offline Update and the system drivers you may install the latest version of Dell Backup and Recovery which will make a new recovery partition from your clean install:
Note you may install additional software before Dell Backup and Recovery if you want it included in your recovery partition. The more things preinstalled, the larger the recovery partition. I usually just include an updated Windows, an activated version of Microsoft Office and the Dell system drivers. However I have included software for specialist applications (scientific instruments) in our research labs which means I can recovery the PC to a working state where the instrument acquisition software was configured and in a working state.
Tom Green
322 Posts
6721
1
Posted March 22nd, 2011 14:00
Hello VYOAMA
You are correct that the bootloader resides on the active partition.
Your next question how does it load windows? Instructions in the bootloader tell
where windows is located on the disk and where to load it from. The old DOS directory
is almost gone from the bootloader It uses and offset to find things on the drive.
Your next question about Dell setting Windows partition active? Yes and have on some systems
and not on others. Your next question about doing it yourself and what you would not be able
to access? One thing you could not access is recover to Factory. Once the connection between
Recovery partition and windows partition is broken you can't use F8 to recover factory image.
Your next question, Yes Dell setup the partition, but is a Microsoft Windows build and you can
create your Recovery partition, system partition, OS partition and set the up in several ways.
Hope this answer some of your questions and always backup your computer before changing
things.
Tom