I downloaded the free version of Zone Alarm, version 5.5.094.000, onto my Dell Dimension 4500 with XP and SP2, installed it OK, restarted like Zone Alarm suggested, went through the tutorial, and everything seemed fine until I tried to connect to the Internet. The signin process completed as it normally does and bingo bango the screen went blank and the PC rebooted. During startup a message appears that says: "The system has recovered from a serious error" and asks if I want to send the report to Microsoft. I say no because the system will restart anyway. Two files are put into the Local Settings/Temp/WER11a6.dir00/ folder with names of Mini051605-03.dmp and sysdata.xml. I try to save them but they are deleted before I can. I tried signing in again - same result. Uninstalled Zone Alarm, restarted, and now I can connect to the Internet without a problem. Has anyone else experienced this problem? I've heard good things about Zone Alarm but maybe I should consider another firewall solution. George
If you have the built in Windows XP firewall enabled, that may be causing the problem. You should only have one firewall enabled. e.g. disable the Windows XP firewall before installing ZoneAlarm.
If it's still a problem, you may have gotten a bad download. Try downloading it again as ZA is probably one of the most popular firewalls.
Inspiron 16 5630 Laptop and WD22TB4 Docking Station
Self-built desktop for recording studio application
I tried your suggestions to no avail. Windows firewall was disabled then ZA was installed. It went through it's configuration process and then I tried to connect to the Internet. Same result -> PC rebooted. Next, downloaded ZA again and reinstalled and retried the connection -> same result. Although this time I was able to capture the files that would have been sent to Microsoft if I had said to send a serious error report - Mini051705-02.dmp and sysdata.xml. Not sure if they are of any help.
I run Zone Alarm in my Dim. 8200 with Windows XP SP 1 No Problems! A friend of mine used Zone Alarm successfully for years. But when he installed SP 2 he encountered problems. Something about SP 2 and Zone Alarm that's incompatible. He uninstalled Zone Alarm and all is well.
Problem running ZA with XP SP2 may be true for your friend, but I have absolutelty no problems with that combination . I have used ZA (free) in its various versions ever since I got this PC in 2003; updated XP SP1 to SP2 last August and ne'er a problem. It seems to me that SP2 is often made the scapegoat for any problems that arise.
I can not address the problem definitively; for what ever it's worth, my friend belongs to a computer club, has built his last two computers and has helped me through several software and hardware problems. Is the Zone Alarm free version somewhat abridged? Just a thought.
The ZA 5.5.094.000 version is current, and dated almost a month ago, so any widespread problems with it should have been reported by now. A quick search on Google reveals some reports of problems, but nothing too unusual.
The ZA forum has some problems reported with the current version, and there is a sticky post mentioning "...if Windows just reboots with no prompting." Seems this could be related. Check it out.
The free version of ZA offers the exactly the same firewall protection as ZA pro, but has fewer options for setting detailed rules to control access. For home users with a single PC (as I have), or a simple home network it is sufficient; you can control the access permissions for different applications (basically 4 options: access to a user-defined trusted zone only or internet, act as server or not). It is a good compromise between flexibility and ease of use. For those with large home networks, or the need to to control more complex connections (e.g. remote access to a corporate network or access home network from remote site) ZA pro may be more flexible. I have not used pro, so I may be missing some additional features that it offers. Others may be able to provide more details.
You seem to this neophyte to make some valid points!! Thanks.
Please allow me to divert a bit here; I don't know if true or false plus my memory isn't what it used to be- but I seem to recall we should not use two software firewalls at the same time. I think MS was one such source. Maybe you could shed some light here. I'm still with Win. XP SP-1. And I think SP-2 has a firewall. If so, do you enable both firewalls (ZA & SP-2) simultaneously or do you just use them singly?
P.S. I'm just now researching hardware firewalls for my single user PC. Man what a job. I'm hoping to eliminate most of the 100+ spam e-mails daily which in turn would block 2-4 virus or worms weekly. I would like to do that for no more that $300. I'm all ears to any and all. Many thanks.
A hardware firewall as provided by a NAT router may be obtained for $20-$50, and this is suitable for a home or small business broadband hookup to cable, DSL, or satellite connection. A hardware firewall designed for a dial-up connection is much less common and is commonly not used. A software firewall on a dial-up connection may be adequate, if not ideal.
One active software firewall at a time. Windows XP SP1 has a firewall, but it is not activated by default. SP2 changes the built-in firewall status to enabled by default. (In addition to many other less-obvious security improvements which reduce the vulnerability of the core code. Windows Critical Security Updates are what the name implies, and SP2 is the most comprehensive Critical Security Update ever. You may remain safe without it, if you are experienced and cautious, and your security program remains flawless, but only the update to SP2 will reduce the core vulnerability. It is a major update and should be performed after proper research and planning.)
One resident anti-virus program installed at a time, running continuously for real-time protection. (Some experienced users may be safe and comfortable disabling real-time protection at times, but most users are better served by leaving it on unless directed by qualified support staff, and only when necessary / only for as long as is absolutely necessary to perform system configuration, maintenance, or troubleshooting. One instance when temporarily turning off the real-time protection offered by resident anti-virus software would be recommended is when a reputable on-line scanner is used to scan the system for viruses and other malware, in case a second opinion or virus removal tools not available with the resident anti-virus software are necessary.)
Several anti-spyware scanners can and should be installed, but most are only used to run a scan of the system for spyware. Some may provide a form of real-time protection, some disallow the acceptance of recognized spyware code, and some provide a list of disreputable sites which the browser uses to disallow (block) connection.
Windows Malicious Software removal tool is a special case. It scans for the most recent and prevalent malware, reports, and removes it.
Microsoft Anti-Spyware (beta) is rated highly effective, but not 100%, at scanning for, detecting, and removing spyware. I believe it also provides some real-time protection.
The free version of AdAware is rated very effective for scanning, detecting and removing spyware. The paid version offers additional features with which I am not familiar.
The free anti-spyware program Spybot S&D is also rated very effective for scanning, detecting and removing spyware. It has an additional blocking feature that offers passive blocking security of known malware, but this additional feature is superceded by the use of Spyware Blaster, noted below.
Spyware Blaster provides a significant ammount of preventative protection by providing a list of known malware code and malicious sites. It is a form of passive blocking, as this program only runs when updating a reference list which the browser checks before allowing connection to a site or allowing active content to be accepted and run from the internet.
A combination of core security applications and components consisting of a dial-up line or a broadband router, a software firewall, a good anti-virus application, the use of all the anti-spyware programs listed below, combined with caution and prudence, is a good start. There are additional anti-spyware applications of merit, and applications like privacy protection and parental blocking may be advisable in some circumstances.
One valuable recommendation is to not enter any information that you would prefer remain private until/unless you are assured the security system is adequately implemented and maintained, and you become familiar with the variety of human and machine vulnerabilities that continue to adversely impact unwary users.
Another important consideration is preservation of system and data files on the PC. In addition to the threat of personal information theft, the loss of use and loss of non-personal data are also hardships that are best avoided. Plan early for how you will recover from a corupted operating system or hard drive failure. Reinstall procedures should be studied and both retail software and user data CDs should be inventoried so the capability to recover can be assured. Backup images of the system configuration and backup copies of user data may be helpful to assure full and accurate recovery.
fireberd
11 Legend
•
33399 Posts
•
112848 Points
514
0
Posted May 16th, 2005 19:00
If you have the built in Windows XP firewall enabled, that may be causing the problem. You should only have one firewall enabled. e.g. disable the Windows XP firewall before installing ZoneAlarm.
If it's still a problem, you may have gotten a bad download. Try downloading it again as ZA is probably one of the most popular firewalls.