UNSOLVED

Fionnmac

updated

20 years ago

F

Fionnmac

3 Posts

0

3742

March 27th, 2007 18:00

Problem with 'fuzziness' on one monitor - please help!!!

Hi,

Sorry if this is in the wrong forum

Background (non-essential) - I have 2 monitors, and recently reinstalled windows after it crashed, however i was lucky enough to keep my harddrive. All the settings had been reset though, and i had to download my software again (For instance i still had itunes tracks but had to reinstall itunes). The resolutions are both set to their maximum, 1600x1024 and 1600x1200.

Problem - My left monitor (dell 2007wfp on the left and a 2007fp) seems to display text very poorly, they look quite 'fuzzy' while my right monitor is perfect. The fonts in particular are blurred, and although it is not terrible and still manageable, the right monitor is definitely sharper.

I installed a graphics card from NVIDIA, although i already had one, in an attempt to fix another problem with some software, but later fixed the problem by changing the dpi settings to 96 (I need to keep this at this level).

So, by installing this graphics card, have i done more harm than good? Should i just uninstall it, or is there something completely different causing this. Is changing the dpi setting an issue?

Also, why is it just one monitor? Feel free to ask any more details etc.

Cheers in advance for any replies
  • frank1942

    1 Rookie

    •

    65 Posts

    379

    0

    Posted March 28th, 2007 01:00

    I kept having problems with my 1907FP flat panel monitor.  Everything (mostly Print) had a shadow that would periodically fade in and out.  I couldn't find any information that matched my problem and even updated the driver to see if that would work.  I finally checked the connections in back and that's what it was, just a slightly loose cable. 
     
    Hope this helps.
  • jmwills

    2 Intern

    •

    11984 Posts

    379

    0

    Posted March 28th, 2007 07:00

    Most of the time it is an improperly seated cable or a driver.  Reseat the cable and make sure you are using Clear Type.
  • Fionnmac

    3 Posts

    379

    0

    Posted March 28th, 2007 08:00

    thanks, but what is 'clear type'?
  • jmwills

    2 Intern

    •

    11984 Posts

    379

    0

    Posted March 28th, 2007 09:00

    Control Panle>Display>Appearance Tab>Effects Button and the second item down either allows for Standard or Clear Type.  The fonts appear much smoother.