UNSOLVED

Richard P. Ward

updated

20 years ago

0

36168

August 2nd, 2006 17:00

Microsoft Baseline Security Analyzer 2.0 - won't scan

Trying to scan with MBSA results in following message:

'The Server service is required and is not running'.

This message comes up after 'downloading update security information' has done.
I've checked my Services, it was set to auto. I tried switching to manual but this didn't help.

The computer name section also has *error* in it. I've typed in my computer name, but no change. IP address - same thing.

Hope you can help,

Rik
  • JRosenfeld

    2 Intern

    •

    4383 Posts

    613

    0

    Posted August 3rd, 2006 00:00

    If server service is not running, MBSA will not scan and you will get the errors you indicate. MBSA will not start the server service, you have to start it manually in services.msc before before opening and running MBSA.

    If it was set to auto, then in principle it should have started when you started your PC and remain in running state throughout the session, but maybe something switched it off (it is one of the services controlled by svchost.exe).

    If server service will not start there is some other problem, double click on server to see its properties, report back what they show, especially the general and logon tabs.

    I have server service set to manual because I don't normally need it, but I start it manually before before opening and running MBSA (usually after the monthly Windows updates).

  • 613

    0

    Posted August 3rd, 2006 07:00

    Thank you JR.

    Got services started in logon after running services.msc. MBSA scan OK. Will follow your advice about scanning after updates in future.

    I'm delighted at how useful this forum is proving. THANK YOU ALL!

    Rik