UNSOLVED

thyde

updated

19 years ago

T

thyde

2 Intern

•

280 Posts

0

19407

July 3rd, 2006 10:00

Internet Explorer will not run

My problem is this, when I click on the Internet Explorer icon the program opens but fails to find the MSN home page and continues searching until I stop it.    I then get the usual MS message telling me that Internet Explorer was unable to link to the web page I requested, thus I am unable to use IE.    Fortunately I have other browsers that I can use.
 
I have searched this Forum and found Denny Denham's reference to this site:
 
 
I have looked at the pages in Denny's reference in order to try to reinstall Internet Explorer for Windows SP2 and  followed the instructions. But I am told that the program is set up for automatic updates and no updates are available for my system.     Presumably all the critical updates had been downloaded before the problem with IE arose.      In the three references in the section entitled "Reinstall Windows XP SP2",  I could not find any specific instructions on how to remove the existing IE software and how to reinstall it.
 
I would be grateful for any further advice.   
 
T.Hyde
 
Dimension 4500, 2.53GHz processor, 512Mb DIMM, Windows XP SP2, 20Gb hard disk, 80Gb hard disk, Roxio CD R/RW, Blueyonder Broadband & LAN, Dell Photo All-in-One printer.

Dimension 4100, 1GHz processor, 256Mb SDRAM, Windows ME, 20Gb hard disk, Adaptec CD R/DW, HP Deskjet 840C, Scanjet 3300c, Blueyonder Broadband & LAN

Inspiron 8600, 1.4GHz processor, 512Mb SDRAM, Windows XP SP2, 40Gb hard disk, Philips CDRW/DVD disk drive, Blueyonder Broadband & LAN

Netgear RP614 v2 router.

 

  • laz123

    1 Rookie

    •

    157 Posts

    844

    0

    Posted July 3rd, 2006 13:00

    Try running sfc if you have the xp disc: RUN/ type cmd, type sfc /scannow (note space) would replace the missing system files.

    BTW it's a pain when ie goes awol. The experts say you can't delete it as it's part of os, but there are workarounds but they're complex. You could also use Firefox.
  • thyde

    2 Intern

    •

    280 Posts

    844

    0

    Posted July 3rd, 2006 21:00

    Thank you laz123.     I had already tried sfc /scannow before I sent my first message.    It was not a success because according to KB318378 this process applies to updating Windows XP (presumably the original) and Windowx XP1.     I have my original Windows disc, with its prehistoric version of Windows XP,  which I used with sfc /scannow but my computer tells me it is not the relevant version Windows XP because it does not contain SP2 files.
     
    Several years ago, pre SP2, I used the above process to reinstall Windows and I recall that I had to download every Windows XP update since I first acquired the computer.      Now it seems that the cure is more tedious to apply than the disease.    
     
    I have both the Avant browser and Firefox on this computer and I have often used them in parallel with IE when I wanted to carry out several operations at the same time.    Since IE went sick I have been using Avant which seems to be quicker than IE, especially when one wants to return to an earlier page. 
     
    T.Hyde
  • manogamez

    43 Posts

    844

    0

    Posted July 3rd, 2006 21:00

    Try "slipstreaming" your old XP disk with an SP2 update.  Here are the instructions:
     
    You should be able to run SFC.
     
    Oh and on a side note, if you like Avant you will love Opera 9.0 Beta 2.
    Try it out.

    Message Edited by manogamez on 07-03-200603:24 PM

  • chuket

    1388 Posts

    844

    0

    Posted July 4th, 2006 02:00

    thyde

    You can give this a try:

    http://h1.ripway.com/chuket/Browse.bat

    It simply registers the most common reasons for connectivity problems. It works about half the time.

  • thyde

    2 Intern

    •

    280 Posts

    844

    0

    Posted July 24th, 2006 19:00

    To Chuket: thanks for your reply.   I am afraid that browse.bat did not produce any helpful information.   I received the following message: "DllRegisterServer in oleaut.dll succeeded."   Whatever does that mean?
     
    To manogomez: thanks for your advice.    I need to read the details about slipstreaming a few more times before I dare try it.    I did run sfc several times but no message was produced unless the response is stored somewhere.
     
    Does anyone know if Windows XP can be updated online using any other browser than IE?
     
    T.Hyde
  • noaj

    22 Posts

    844

    0

    Posted July 24th, 2006 21:00

    Hi thyde!
     
    yes, you can actually download an update of IE browser using another browser like mozilla or firefox. but you might also want to try reinstalling IE browser using your windows xp sp2 disc since you mentioned that you have windows xp SP2. just try the ff:
     

     

    Click on Start, Run, then type rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\Inf\ie.inf, then click on OK. This is case sensitive. After clicking on OK, it will look for the iexplore file which is in the win xp cd so make sure that the customer has it. Just insert the cd, then click on browse. Browse to the drive letter of the cdrom drive, then to the i386 folder then just double click on iexplore file. In the copy files from box, this should be written: D:\i386\iexplore (where D is the drive letter of the cdrom drive), then click on OK. It will start extracting the file. After it finishes, restart the computer then try IE again.

     
    :smileywink:
  • chuket

    1388 Posts

    844

    0

    Posted July 25th, 2006 03:00

    thyde

    All browse.bat does is register DLL's that are needed for IE to function. You may also try running  noaj's rundll routine to repair IE. If it runs you will need to get all MS updates again as it puts IE to the original settings. The Start> Run cmd is:

    rundll32.exe setupapi,InstallHinfSection DefaultInstall 132 C:\windows\inf\ie.inf

    Copy /paste the above bold text in the Run box and [OK]. Without the CD it will pop up a box with C:\windows\inf\i386 in it. Edit it to C:\i386 or C:\Windows\i386 and [OK], (which ever one works). This will run the repair of IE and you should be good to go afterwards.

  • thyde

    2 Intern

    •

    280 Posts

    844

    0

    Posted July 27th, 2006 06:00

    To Chuket & Noaj:  thank you for your replies.    I have followed your suggestions but without success.    Firstly, I do not have an up-to-date CD containing XP - SP2 but only the original Dell system disk which pre-dates both SP1 and SP2.    I have tried to use that but when I run the routine I am told that newer versions of some of the files exist (DHTMLED.OC_ and TRIEDIT.DL_) and I am asked if I want to have them over-written.    I retained the newer versions.     There was another error message "Cannot copy iedw.exe" and I continued the program without it.    IE still failed to open at the home page even after re-starting the computer.    I have also run the install program using the C:\I386 folder with identical results as given above.
     
    I have searched both the CD and the hard disk to try to find "iedw.exe" but it cannot be located.     Perhaps I could try to "Google" it.
     
    T.Hyde
  • thyde

    2 Intern

    •

    280 Posts

    842

    0

    Posted July 27th, 2006 12:00

    I used Google to find out more about iedw.exe and I copied it from another computer on my network.      I have rerun the program that I was recommended by Chuket & Noaj but without success.     I have also re-run sfc\scannow but neither faulty nor missing files were detected.    I guess that I will need to continue with Avant or Firefox for a while.
     
    T.Hyde
  • noaj

    22 Posts

    460

    0

    Posted July 27th, 2006 13:00

    i guess  you would have to manually reinstall IE browser the long way. using the windows xp sp1 disc that you have then try to run some updates on it. try the steps below if it helps.
     

    Uninstall and reinstall IE and outlook express

    -click Start, and then click Run. In the Open box, type regedit, and then click OK.

    -uninstall Internet Explorer 6 browser

    click on the plus sign next to the FF:

    HKEY_LOCAL_MACHINE

    SOFTWARE

    Microsoft

    Active Setup

    Installed Components

    -click once of the ff: key

    89820200-ECBD-11cf-8B85-00AA005B4383

    -on the right pane locate value IsInstalled. and do a right click. Choose Modify. Change default value from 1 to 0; then click ok.

    -quit registry editor and restart system

    -after system reboots you will get the message removing ie settings just click on YES.

    -go to add remove programs > click on add and remove windows components > uncheck and check internet explorer > click on next > put in the xp cd in the cd-rom drive > click on next until installation finishes.

    ***If after uninstalling and reinstalling ie it still does not work you may just have to do DFFR

     

    have a nice day!. :smileyhappy: