hi, i own a dell dimension 8200 and it is a desktop computer. my family and i have owned this computer for a couple of years. during the day yesterday, some workers who are painting the inside of my house had to shut off the power somewhere in the house. and, the computer was shut off. when they were down with the power, they turned it back on and the computer was restarted. i cam home and found that is had been restarted. i restarted it again and the screen that had the dell symbol in blue with www.dell.com and Dimension 8200 with a bar that was partially filled and BIOS Revision A01 had shown. usually, that bar fills completely very quickly and then the Windows XP screen comes up with another bar below. That window also disappears soon enough and then the welcome screen comes up and my desktop is seen. but, now, the bar is with the dell symbol is filling very slowly. it takes about 15 minutes or so for it to fill. then, instead of the Windows XP window coming up, there is just a blank black window with nothing on it. i don't know hot to fix this or how to get it to the desktop. could anyone help or have any advice on what to do?. if not, thanks anyway.
i tried to tap the F8 when the computer was booting. the first screen that came up wass the dell symbol screen and the F8 didn't work. any other suggestions maybe. i'm currently using my apple laptop so i can't download anything on the dell computer or the laptop. thanks for your suggestions.
Was the computer plugged into a surge protector? It sounds like you got a surge when the power came back on. If that is the case, there could be all kinds of problems caused with that if you didn't have any protection.
Your best bet is to first go to support.dell.com and download the diagnostic utilities for your computer and run them. If that comes up clean, then we will have to look elsewhere.
When the computer is booting up, start tapping the
F8 key so display the options menu. One of the options will be
"Last Known Good Configuration". With the arrow keys, highlight LKGC and hit
Enter. This will restart your computer with the last settings that worked. See if that will help.
You just keep tapping
F8 after the Dell splash screen when the screen is black before the Windows XP loading screen begins. You might have to try several times, because you have to hit it just right.
I am having the same trouble. I cannot power off my computer to reboot so I have to turn off the power on the surge protector, and I think I am messing it up more everytime I do that. When I manage to get it to appoint when I am trying to reboot from the CD, an error message comes up: "The application on DLL C:\WINDOWS\system32\umpnpmgr.dll is not a valid Windows image. Please check your installation diskette." When I click "OK" then I get a black screen with the cursor and that's it. If I leave it alone for 1/2 hour, Windows appears to come up, but not all of the menu options are there and it runs very slowly. I am not sure where to go from here. I am using my work laptop to access the internet and write this.
Bronze, I turned off the surge protector one more time to reboot, with my finger poised over the F8 key and started tapping it as soon as the Dell sign came up and it beeped and is now installing Windows XP Home Edition from the installation CD. This is the same CD it said it could not read for the past week. But it has progressed to "Installing Devices" so perhaps it will work this time. I care if I lose my data, but I'd rather have the PC working again than not, so, if it's lost it's lost, and I can reload the critical stuff from my work PC. Thanks so much!
I had the same problem when I performed routine maintainence. I did a chkdsk /f to repair corrupted files and when I finished and rebooted I received the service.exe message with the missing dll file. Here is how I fixed the problem.
Turn computer off
restart computer and hit f12
pick boot from cd rom etc.
place xp cd in drive
start cd
when it asks if you want to install xp, restore it or quit, choose R for restore
The next screen will ask you where you want to boot from. The option will be "1 C:\windows"
make that choice.
change directory to D:\
change directory to D:\i386
at the prompt type in "expand umpnpmgr.dl_ C:\windows\system32\umpnpmgr.dll
the procedure replaces the umpngmgr.dll to its proper place
change directory to C:
change directory to C:\windows
change directory to c:\windows\system32
use directory command to find "dir umpnpngr.dll"
when you see it there reboot the machine and it should start normally
baldy14
3 Posts
338
0
Posted March 26th, 2006 17:00