UNSOLVED

alai7

updated

20 years ago

A

alai7

1 Message

0

964

May 31st, 2006 12:00

Cannot install XP dual boot (HD seems unpartitioned, but is not)

Hi
I looked in the forum but I dont see any problem/solution
like the one I am experiencing. So here is my story.

Note: I have installed multi-boot on many PCs and I think
I know how to do it...

I have a Dimension 3100 with 160 GB HD and would like to have
a second partition to install Windows XP cleanly (without all the
Dell apps trials etc).

So I did:
- reduced the partition C to some 60 GB with PM 8
- checked the partitions are all there (the Dell recovery ones
and the reduced C:) and there is plenty of unpartitione space too.
- booted with the XP installation disk

Now when I get to choose the place to install or repair
I am only presented with a disk C unpartitioned of 160 GB.
I am not offered the usual options to select an existing partition
or unpartitioned space, which is what I wanted: install on
unpartitioned space to have 2 XP (installed at the same time.

Any idea or advice?

Great forum. Thanks so much.
Alberto.
  • pr00959

    33 Posts

    201

    0

    Posted May 31st, 2006 16:00

    When you ran pm did you choose install another OS. This prepares the partition and marks it as active so you can install. It gives you an option as to what OS your going to install. Also check the help filess in pm.
  • pr00959

    33 Posts

    201

    0

    Posted May 31st, 2006 16:00

    Almost forgot. PM includes a program called boot magic. This helps you choose which OS to boot.