Boot Vista Raid ON or Raid Autodetect/ATA in BIOS (dimension 9200 or XPS 410 -
A How To
Another forum member, twotiers, was kind enough to compile the postings of forum members ChandlerL and dcgtls a couple of days ago. Of course, these postings sometimes get lost in the number of posts! I think this is a very important topic and one that should stay near the top of this Vista list so a lot of folks can be helped. So I am posting it again on behalf of twotiers who compiled the writings of ChandlerL and dcgtis.
Although no guarantees, these posts look like excellent work arounds to the ongoing Raid problem as it relates to Vista and Intel chipsets. Of course, a simple solution is to change your BIOS parameter from raid on to raid autodetect. However, that solution doesn't help folks who want to keep raid arrays or want to leave the BIOS parameter unchanged for other reasons.
It would be nice if the forum moderators would take a look at these posts and put it up top permanently. Afterall, there are MANY folks who have needed help and there have been NO clear cut solutions from Intel. Anyhow, here it goes....
Twotiers writes........
"I claim no credit for the procedures outlined. That must go to:"
Nonetheless, I thought it might be useful to have both methods in one post in the Vista forum, as it does provide a way to change the boot to RAID AutoDetect / ATA (and save on the Boot time) but still have the option to move back to RAID On if you wanted to have a RAID array at a later date.
This is what worked for me.
My System
---------------
Dimension 9200 (XPS410)
E6600 Core 2 Duo Processor
2 x 250 GB HDD (non RAID)
2GB RAM
Skip this section if you have Vista installed with RAID On and only want to enable booting with RAID AutoDetect / ATA BIOS setting.
Installing Vista with RAID On setting in BIOS
---------------------------------------------------------
I clean installed to a different HDD and dual-booted, but I believe the procedures work for other scenarios.
1. BACKUP DATA
2. BIOS set to RAID On
3. Used ChandlerL instructions to get RAID driver files from the Drivers folder.
4. Copied above files to root of a floppy. With Vista I believe it could be a CD or USB device.
5. Booted to Vista DVD.
6. At appropriate point, chose to load driver and pointed to floppy.
7. Installation continued to completion.
At this stage, I could boot into Vista with the BIOS set to RAID On, but it would fail if I changed it to RAID AutoDetect / ATA.
Enable Vista Booting using RAID AutoDetect / ATA setting in BIOS
-------------------------------------------------------------------------------------
Scroll down and follow the instructions to create the Mergeide.reg file (it doesn't have to be saved to a floppy).
The KB article also talks about various files, but I found these were all present already.
3. Double-click the Mergeide.reg file and say Yes to merging to the registry.
4. Reboot and F2 into the BIOS settings. Change SATA Operation from RAID On to RAID AutoDetect / ATA. Save and exit.
5. The boot order gets changed, so F2 into the BIOS again and put it right. Save and exit.
6. The next boot should be into Vista under RAID AutoDetect / ATA settings!!
The system will also boot if you change the BIOS setting back to RAID On. Remember to fix the boot order if you do so.
These procedured worked for me and with my system. I hope they do for you as well, but no promises.
Scott: I have had an error message which from the Intell Matrix Storage Manager after my computer had rebooted. I also had a "your computer just recovered from a serious error" message. Have been on Dell support for two days. I had this error message on an original computer I purchased in December. It ultimately crashed and I had to send it back to Dell for an exchange. This is now happening on my recently received exchange computer. I am not an expert computer guy but it would appear the issue is what you have described. We ran full diagnostics and the Hard drives appear to function. I am writing to you since you and I have similar computers and I was hoping if you can advise if I am having a similar issue and what would be my best course of action. Thanks for your help. I have XPS 410, Intell Cor 2, 2.66 ghz.
Message Edited by Sleeplessinportland on 04-07-2007 12:10 PM
Sleeplessinportand, right now there is not one clear cut answer for everyone who is experiencing this problem. It is important to note that you should first ensure your BIOS is updated to the latest one. If you type in your service tag under updates, you should also notice that there is a firmware update for the Phillips DVD drive. You should first do these two things and see what happens.
If the errors persist, the simplest solution (in terms of getting rid of the error messages) would be to change your BIOS parameter from raid on to autodetect. However, that doesn't work for everyone since some folks don't want to reinstall their OS or they are using a raid array and don't want to lose it. However, if you don't use raid and don't mind losing it, as well as reinstalling your OS, this should work fine.
The other solutions are more advanced and I don't take credit for writing them. They were presented by ChandlerL and dcgtls (two different solutions) presented by two different forum members. I thought it was very important to keep their posts noticed. That's why they have been reposted here at the top of the Vista forum. Please note that the thread presented by dcgtls was the most recent.
Even though Intel has not presented a definitive answer/solution for the problem, they have at least noticed the problem (FINALLY). You can see their post below:
In regards to Intel, a critical BIOS update is supposed to be coming soon. Apparently, Intel has now discovered issue(s) that casue kernel blue screen of deaths (BSOD) and possible data corruption with multi-core processors. It is not known when the update will be posted but it is expected to be sometime in the near future.
I am not currently using any of Apple's software on my Vista drive due to the many compatibility issues that have existed up to this point. However, you might want to take a look at this link:
Aside from the topic of Intel chipsets and Raid, you must be very careful about the type of software you put on Vista. It's still a new OS and there are many things that don't work too good with it right now. I would strongly suggest that you download and install the following:
This Windows Vista Upgrade Advisor is a handy little tool, not just for people with XP that are thinking about Vista BUT also current Vista users. It is not perfect and may overlook some things, but it's still a handy tool to use. You can scan you system for programs that are not compatible with Vista.
Update...I have previously posted the workaround solutions that two other forum members created. Since that time, I just wanted to share a few things.
On 04/11/07, I decided to reformat my system since I no longer needed to run a dual boot with XP/Vista. This time, I did not do anything too special. First, I ensured the BIOS was updated to the latest edition (as of 04/11/07) "and" that I had the new firmware update for my Philips DVD drive (the likely culprit for all these issues). Then I changed my BIOS setting from autodetect to raid on in the Sata Operation folder. My hard drives remain on Sata ports 0 and 1. My DVD rom and DVD+-RW remain on Sata ports 2 and 3. I continued with the setup of a raid 0 array as well as the reinstallation of Windows Vista. No more problems :smileyhappy: This may not work for everyone, but I wanted to share my experience. I have not received any error messages since this last reinstall and everything seems to be working great. Good luck to everyone else.
I've got a Dell XPS410 with xp, with a vista upgrade DVD. Will this same fix work for me? I have gotten the same STOP error message when using RAID / Auto Detect, which is necessary for the Vista installation CD (otherwise it fails)
So, yeah, will this fix work in my case also? Thanks!
Chad, my suspicion is that the firmware for my Philips DVD drive did more to fix the situation versus the BIOS update. So even though you've got an XPS 410, I guess the question is what type of optical drives to you have? If you have a Philips DVD drive and update the firmware like I did, hopefully you will have a simlar (positive) experience. Good luck.
Unfortunately I keep checking the forum when I'm at work and away from my computer. I know I"ve got a 16x DVD+/- RW, so we'll see. I'll update everything first to make sure I don't need to take the drastic step of changing registry files! Thanks.
scott784
388 Posts
897
0
Posted April 6th, 2007 01:00