dpereziii

updated

12 years ago

D

dpereziii

1 Message

0

180757

April 21st, 2015 10:00

Best Practice for configuring HTML5 and Native Connector simultaneously.

Is it possible to setup both HTML5 and the Native connector for my users? What would be the best setup?

  • 526

    2

    Posted April 21st, 2015 20:00

    The best way I have found to do this is to create 2 web interface sites. one configured for the native connector and one for HTML5. I put a URL in the message centre with a message like "This is the native connector site. Click for HTML 5". A similar message with a URL back to the native connector site is on the HTML 5 site.

    Scott.

  • DELL-Sam H

    57 Posts

    526

    0

    Posted April 24th, 2015 15:00

    That's the way that I would suggest too.

    We're working on making this even easier, so stay tuned. :)

  • 526

    1

    Posted April 26th, 2015 20:00

    As a follow up to this, this is the message I put in the message centre:

    For use by XXXXXXX authorised personnel only.

    This is the Native Connector site.
    https://xxx.xxx.com/xxxhtml5" style="color: rgb(255,0,0)">Click here for HTML5

    Using the native connector gives you the best performance but requires that the connector is installed on the PC.

    Using HTML5 allows you to connect using a HTML5 compliant web browser (IE11, Chrome, Firefox) without having a connector installed. Performance is not as good as when using a connector, but it allows you to connect from almost anywhere.

    Also, when adding text to the message centre DON'T use ctrl+enter to add new lines as this breaks copy & paste and has no effect on final formatting anyway.