UNSOLVED

Vinayak Srivastava

updated

2 years ago

VS

Vinayak Srivastava

1 Rookie

•

2 Posts

•

2 Points

0

1097

August 26th, 2024 10:43

Pc doesn't boot after replacing cmos battery

I was getting the TIME-OF-DAY NOT SET-PLEASE RUN THE SYSTEM SETUP PROGRAM prompt from the past few days, so I decided to change my Cmos battery. After changing the battery, I got this prompt again, but I accidentally clicked on continue, and the computer hasn't been turning on ever since.

  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    0

    0

    Posted August 26th, 2024 12:37

    Did you try removing the battery, waiting 15 minutes, then reinstall the battery and try booting again? Also was the battery purchased new or one you happened to have in a drawer.

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • redxps630

    11 Legend

    •

    16431 Posts

    •

    83176 Points

    0

    0

    Posted August 26th, 2024 13:14

    Try clear cmos settings via motherboard jumper, and like JO said make sure you replace with a new battery 

  • Vinayak Srivastava

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted August 26th, 2024 14:23

    @JOcean​ Thanks for the reply. Yes, I did try removing and reinstalling the battery, but it didn't work. I bought this battery just two days ago.

  • JOcean

    11 Legend

    •

    12621 Posts

    •

    69453 Points

    0

    0

    Posted August 26th, 2024 20:16

    @Vinayak Srivastava​ Check the battery contacts and make sure the battery is not installed upside down (easy to do). You can try another new battery as I have purchased batteries in the past which measured low voltage even though they were new. Other than that it could be a MB problem.

    I am not a Dell employee...I am forum volunteer

    Serious work on an E5430 and constantly building and working on an i5-6500 Desktop

  • PC Parts Bin

    1 Rookie

    •

    81 Posts

    0

    0

    Posted November 28th, 2024 20:00

    If you have a graphics card that is after market you will need to uninstall it. Then get into buos via integrated graphics on the CPU.

    from there……..

    -Secure Boot Off

    -Video set for automatic or video card

    -Fast/Quick Boot Off

    -UEFI ON, Legacy Boot ON