Hello everyone. I have one issue. Actually, i have VNXe 1600 with SPB battery alert. After i change battery 5 times(5 new batteries) the problem is still there. After that i order and change whole SPB and the problem is still here. I think fw upgrade can fix it, but coz of fsulty component i cant do fw upgrade. Do you have any solution for this problem?
When you replaced your battery did your system start a battery test or no? are you seeing the same error from both SP’s or are you seeing it just from one SP? Did you double check to make sure that the connector that connects the battery to the SP motherboard is connected?
Please let us know if you have any other questions.
i can see error just for one sp. We didnt check conector but we tried to change whole controler. and the problem is still there. After we did power cycle, SPB was without error for like 6 hours, and after that error was still there. Do yoy have any solution? I guess something like forcing fw upgrade will help, but we cannot run it coz of faulty component.
I would check using the other SP’s management to see if you are seeing the error as well. I have seen in some cases that the error is only showing under a single SP’s management connection. If that is the case, then you can restart unisphere management by going to your IP address/setup and select restart management on both SP’s.
Please let us know if you have any other questions.
I have the exact same vnxe1600 with the exact same problem. SPB is reporting a battery error. We replace the battery but the same error is present. We replaced the entire DPE and the same error is present. It does indeed appear to be firmware related. Have you any suggestions?
As an aside, IP/setup doesn't exist on the vnxe1600 series. You can login to unisphere and reboot each controller however, that doesn't resolve the issue.
If you take SPB & put it in SPA slot does the issue follow the controller or stay with the slot? I am thinking that they maybe an issue with the controller where the battery plugs in.
Please let us know if you have any other questions.
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
4782
0
Posted April 29th, 2020 10:00
Hello VladimirDel17,
When you replaced your battery did your system start a battery test or no? are you seeing the same error from both SP’s or are you seeing it just from one SP? Did you double check to make sure that the connector that connects the battery to the SP motherboard is connected?
Please let us know if you have any other questions.