UNSOLVED

Seb_0000

updated

6 years ago

S

Seb_0000

4 Posts

0

1335

October 30th, 2020 12:00

VNX 5400 : resest network config storage processor

Hello

 

we have mode a VNX System from antoher datacenter.

we need to change the network confuguration, and we follow this procedure : 

https://www.dell.com/community/VNX/VNX-5200-unified-Change-Subnet-and-Gateway-addresses/td-p/7064126

We have change address IP for the CS with succes, but when we try to change on SP we have an error :

script block after change IP adress from SPA

[root@GR-DC2-EMC-01 nasadmin]# /nas/sbin/clariion_mgmt -stop
Checking if running as root...yes
Checking if model is supported...yes
Checking if integrated system...yes
Checking if interface eth3 is configured...yes
Checking if SP (10.17.11.4) is up...yes
Checking if SP (10.17.11.5) is up...yes
Checking if CS IP address matches domain record...yes
Step 1/12 [28185788417]: Changing SPA IP address.
Changing SPA IP from 10.17.11.4 to 128.221.252.200 (subnetmask 255.255.255.0, gateway 128.221.252.104)
Step 2/12 [28185788421]: Waiting for SPA to restart.
Waiting for SPA to go down.....done (19 secs)
Step 3/12 [28185788425]: Waiting for ping response from SPA.
Waiting for 128.221.252.200 to respond...done (2 secs)
Step 4/12 [28185788427]: Waiting for VNX OE for Block software to start on SPA.
Waiting for VNX OE for Block software to start on SPA...done (56 secs)
Waiting until SPB sees 128.221.252.200 in the domain....................................................................................Error 30 [15300888558]: Error trying to change IP address of the SP
WARNING: This error may have caused the network settings to be in an inconsistent
WARNING: state. This utility must be run again with the '-retry' flag to
WARNING: re-attempt this operation.

After that SPA is not available 

Do you have an idea from origin ?

Thanks

Sebastien

 

 

  • DELL-Josh Cr

    Community Manager

    •

    9798 Posts

    •

    45341 Points

    1018

    0

    Posted November 2nd, 2020 12:00

    Hi Seb,

    Does the retry flag help at all? You may also want to try rebooting that SP.

  • Seb_0000

    4 Posts

    992

    0

    Posted November 5th, 2020 12:00

    Hello

     

    thanks for your answer, yes i 've tried with the flags, but it doesn't work.

    [root@GR-DC2-EMC-01 nasadmin]# /nas/sbin/clariion_mgmt -stop -retry
    Step 1/12 [28185788417]: Changing SPA IP address.
    Step 2/12 [28185788429]: Updating VNX for File database with SPA IP address
    Adding rules to allow outbound traffic from SPB
    Updating SYMAPI database with new Block IP addresses...........failed to update database

    Changing IP address for CKM00150601030

    Discovering storage on GR-DC2-EMC-01 (may take several minutes)
    Error 13422231563: The storage array CKM00150601030 requires security credentials.
    Error 4201: invalid IP address: 128.221.252.200
    Error 38 [15300888566]: Failed to update SYMAPI DB.
    WARNING: This error may have caused the network settings to be in an inconsistent
    WARNING: state. This utility must be run again with the '-retry' flag to
    WARNING: re-attempt this operation.
    [root@GR-DC2-EMC-01 nasadmin]# /nas/sbin/clariion_mgmt -stop -retry
    Step 1/12 [28185788417]: Changing SPA IP address.
    Step 2/12 [28185788429]: Updating VNX for File database with SPA IP address
    Adding rules to allow outbound traffic from SPB
    Updating SYMAPI database with new Block IP addresses...........failed to update database

    Changing IP address for CKM00150601030

    Discovering storage on GR-DC2-EMC-01 (may take several minutes)
    Error 13422231563: The storage array CKM00150601030 requires security credentials.
    Error 4201: invalid IP address: 128.221.252.200
    Error 38 [15300888566]: Failed to update SYMAPI DB.
    WARNING: This error may have caused the network settings to be in an inconsistent
    WARNING: state. This utility must be run again with the '-retry' flag to
    WARNING: re-attempt this operation.
    [root@GR-DC2-EMC-01 nasadmin]#

  • DELL-Sam L

    Community Manager

    •

    8147 Posts

    •

    34706 Points

    983

    0

    Posted November 5th, 2020 17:00

    Hello Seb_0000,

    What is the current OE of your VNX5400?

  • Seb_0000

    4 Posts

    976

    0

    Posted November 6th, 2020 00:00

    Hello,

     

    [root@GR-DC2-EMC-01 nasadmin]# /nas/sbin/navicli -h spa getagent

    Agent Rev: 7.33.9 (2.31)
    Name: K10
    Desc:
    Node: A-CKM00150601030
    Physical Node: K10
    Signature: 3944470
    Peer Signature: 3944514
    Revision: 05.33.009.5.231
    SCSI Id: 0
    Model: VNX5400
    Model Type: Rackmount
    Prom Rev: 33.51.00
    SP Memory: 16384
    Serial No: CKM00150601030
    SP Identifier: A
    Cabinet: DPE9

     

    [root@GR-DC2-EMC-01 nasadmin]# nas_version
    8.1.9-232

     

     

  • DELL-Josh Cr

    Community Manager

    •

    9798 Posts

    •

    45341 Points

    966

    0

    Posted November 6th, 2020 10:00

    Can you try updating? https://dell.to/351TJwz

  • Seb_0000

    4 Posts

    943

    0

    Posted November 9th, 2020 06:00

    Hello

    my problem was solved, i revert the adress IP of CS and after i execute the process to change network.

    it's work with success

    thank you for your help

     

    Sébastien

  • DELL-Josh Cr

    Community Manager

    •

    9798 Posts

    •

    45341 Points

    935

    0

    Posted November 9th, 2020 09:00

    Great to hear that you got it resolved.