After replacing the SPS on the VNX 5300, the present status appears but the failed symbol continues and the leds remain orange, should I redo the SPS change or is there another way around?
In most cases when you replace an SPS, it will start a battery test which can show the system as still faulted.I would check your logs to confirm that a battery test was not run by the system.If a test was not started and completed then you will need to look at the back of the SPS to ensure that it is green with no errors.
After replacing the battery, the problem persists as shown in the images, including already reviewing the cables and replacing the cable that connects the battery to the SP.
Issue is from Dirty Cache you need to verify and make sure the connectivity have redundancy multi-path and reboot the SPS one by onethen it will be disappear
DELL-Sam L
Community Manager
•
8150 Posts
•
34715 Points
1677
0
Posted January 12th, 2021 09:00
Hello Beremiz,
In most cases when you replace an SPS, it will start a battery test which can show the system as still faulted. I would check your logs to confirm that a battery test was not run by the system. If a test was not started and completed then you will need to look at the back of the SPS to ensure that it is green with no errors.