Mrinal-Kiosk

updated

14 years ago

1

2423

October 16th, 2012 00:00

Snapshot creation for VNXe 3100

Hi,

I am very much new for this support forum so treat me a tranniee.

We have the bollowing details:-

1. VNXe 3100 (Dual SP).

2. Symantec Backup Exe 2012.

3. Hyper-V server (Win 2008 R2) where VMs were mounted on to the LUN.

4. All VMs were mounted on to the iSCSI drive (5 LUN) and the BE 2012 is taking these VMs backup from the Hyper-V server.

5. Protection is not enabled for the iSCSI LUN dur to the space issue.

Now, few days ago our SPB went down. Called the EMC support and they identified that the SPB was down due to the following:-

1 Noticed the DART 3 was freeze.

2 Panicked the DART 3 and dumps were collected.

3 Restarted DART it came up fine.

4 Checked LUN 1 on SPB was 100% full. Protection specified was 0 from GUI but there was a snapshot in the backend which was promoted.

5 Customer informed that he was using Symantec to take a backup and snapshot option was enabled. Probably it talked to DART directly and snapshot was created.  Informed him he needs to either specify protection

    space 105% of lun size or not take snapshots at all.

6 Demoted the snapshot and deleted it from cli.

So, now my question are:-

1. Is there any linkage of Backup with the snapshot protection of EMC.

2. We have'nt enabled the snapshot for taking the VMs backup but how come the snap is being created.

Am I missing some things or the EMC is missied confiured.

  • 1035

    0

    Posted November 9th, 2012 06:00

    Hi Mrinal-Kiosk,

    This is the EMC VSS (Volume Shadow copy Services) that is taking the snapshot. Let me explain.

    When there is a request to take a backup, the BE uses EMC VSS provider to talk to the storage server to take a snapshot of the lun being backed up. This snapshot is used as a source to backup the data. The data from snapshot is more consistent than a lun that is continuously being updated. Again, the user doesn't have to worry about deleting this snapshot, because the backup application (here BE) will delete the snapshot it created after the backup job is completed. This snapshot is not different from any other user created snapshot in terms of protection space and hence we need to provision protection space to make space for these snaps.

    Hope that helps.

  • jpveen

    1 Rookie

    •

    85 Posts

    1035

    1

    Posted October 16th, 2012 04:00

    When NDMP backups are configured in Symantec a snapshot can be created through the NDMP protocol. However i would assume that if backing up VM's on iSCSI luns the backups are VM-client-based and not NDMP based.

    To answer this question more precise you need to provide some more info on how the backups are being made exactly.

  • 1033

    0

    Posted October 17th, 2012 23:00

    Hi Veen,

    Thank for the reply.

    See, we have BE 2012 to take backup of VMs(hosted on  hyper-V host server, Win 2008 R2).

    We have five number iSCSI LUN created on VNXe 3100 which were mounted on to these Hyper-V host server using Microsoft iSCSI inatciator. All the VMs were inside these mounted LUN on to the hyper-V server.

    We were not using NDMP to take any backup of the EMC box.

    Now, as I told in my above satement that the SPB went down. EMCsupport identified that a Snapshot was created , which took the whole free space, thus making the controller to freeze.

    My query :-

    1. Does BE 2012 can able to create snap inside the EMC box while takaing VMs backup.

    2. Does we need to enable the snap protection , which could solve the issue.

    Thanks.

  • 1033

    0

    Posted November 20th, 2012 01:00

    Hi,

    Please, correct me if my understanding is wrong.

    You mean to say that when Symantec BE 2012 is taking host based VM backup from the Hyper-V host server, a  "Volume shadow copy" will be created inside the EMC box rather in the mounted drive(inside the Hyper-V server)

    And the BE 2012 will take backup from this snap which is (Snapshot) present inside the box.

    If this is correct then we need to enable " Protection Space ' inside the EMC VNXe 3100 box  against the VMs where there is VM backup or Drive backup need to be done.

    Is this a drawback of Symantec BE 2012 or any other Backup software or else this is how technology works for VM backup (Hyper-V/VMware).

    Thanks.

  • 1033

    0

    Posted November 22nd, 2012 23:00

    Hi,

    Waiting for any suggestion.

    Thanks.

  • 1033

    0

    Posted November 23rd, 2012 07:00

    Can you check if you have EMC VSS provider installed on the machine that you have BE installed?

    VSS based backup is not a draw back, because this is enabling it to take a consistent back up. Imagine if you are taking a backup from a live fs/lun without taking a snap. In this case your fs/lun is continuously being 'changed/modified' and you might be backing up a half changed file / data, which means that the backup is not consistent. Whereas in a snap based backup, you first take a snap of the whole lun at a particular point in time, and the backup is taken from that and you never have a situation where your file is half changed.

  • 1033

    0

    Posted November 23rd, 2012 23:00

    Hi,

    We were not taking the whole LUN's backup rather VM's backup  located on to the LUN.

    We were not using EMC VSS provide rather Microsoft VSS.

    This is a host based backup.

    My query was :-

    1. Does Backup software (Suymantec BE 2012 in this case) can able to create a snap inside the EMC VNXe 3100 box (where EMC VSS provide is not installed).

    As you might have checked in my first post that the Operating System is Windows 2008 R2, which mean all backup were through snap technology (Shadow Copy).

    Just to inform , when backup executes a "Shadow Copy" created in the "%Drive name%\temp". and deletes after jobs completes

    Thanks.

  • 1035

    0

    Posted December 3rd, 2012 00:00

    Hi,

    Any suggestion guys...

    Thanks.