TonyJK2

updated

11 years ago

T

TonyJK2

2 Intern

•

388 Posts

0

2228

November 23rd, 2015 02:00

How to remove Unisphere Central ?

Hi,

We have set up an Unisphere Central to manage our VNX and CLARiiON SAN.

However, my supervisor doesn't like the idea and delete the VA.  Now, whenever we login Unisphere, we observe that the Unisphere Central still exists and seems to be no way to remove it.

Your advice is sought.

  • brettesinclair

    2 Intern

    •

    715 Posts

    1348

    0

    Posted November 25th, 2015 15:00

    Sorry, there should be a 'domain' in the syntax. try this;

    naviseccli -address < spaipaddress> domain -remove

    So if your SPA ipaddress is 192.168.1.100 and your Unisphere Central IP Address was 192.168.1.150;

    naviseccli -address 192.168.1.100 domain -remove 192.168.1.150

  • brettesinclair

    2 Intern

    •

    715 Posts

    1348

    0

    Posted November 23rd, 2015 04:00

    You may try to remove Unisphere Central from the domain using naviseccli;

    naviseccli -remove

    So if your spa address is 192.168.1.100 and your Unisphere Central IP address was 192.168.1.150;

    naviseccli 192.168.1.100 -remove 192.168.1.150

    Depending on your security you may need to add user, password  and scope for authentication.

  • TonyJK2

    2 Intern

    •

    388 Posts

    1348

    0

    Posted November 24th, 2015 21:00

    Thanks for your prompt reply.

    When I run the statement, it says that "Invalid switch: - remove"

    Regards

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    1348

    1

    Posted November 26th, 2015 01:00

    Its alway good to have the command reference guide PDF downloaded from support.emc.com to check for the exact syntax

  • BHB.DAA

    15 Posts

    1348

    0

    Posted September 8th, 2016 10:00

    I have a similar issue. Unisphere Central was deleted before removing it. We are running a dual datamover NS120 (CX4-120 backend).

    The IP addresses are listed below:

    Control Station     192.168.2.128

    SPA      192.168.2.129

    SPB     192.168.2.130

    Unisphere Central (deleted)     192.168.2.99

    If you list the domain members, you don't see the Unisphere Central machine

    C:\>naviseccli -address 192.168.2.129 domain  -list
    Node:               a01emccs01
    IP Address:           192.168.2.128
    Name:                 a01emccs01
    Port:                 80
    Secure Port:          443
    IP Address:           192.168.2.128
    Name:                 a01emccs01
    Port:                 80
    Secure Port:          443

    Node:                 APM00105201790
    IP Address:           192.168.2.129(Master)
    Name:                 a01-ns120-spa
    Port:                 80
    Secure Port:          443
    IP Address:           192.168.2.130
    Name:                 a01-ns120-spb
    Port:                 80
    Secure Port:          443

    It is in Unisphere though.

    UnisphereCentral.PNG.png

    I tried using the remove command, but receive the following:

    C:\>naviseccli -address 192.168.2.129 domain -remove 192.168.2.99

    WARNING: You are about to remove following node from the domain: 192.168.2.129

    Proceed? (y/n) y

    Domain remove operation failed. The directory entry not present for IP - 192.168.2.99

    Any ideas?