Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
First you should determine the type of mirroring (Synchronous or Asynchronous) which best suits you, and if you choose Async, you'll need to create a Reserved LUN Pool.
i assume you connected SPA0 to SPA0 and SPB0 to SPB0, i also assume that both VNX5400 are in the same Unisphere Domain ?
1) validate that MirrorView connections are logged-in one more time. In Unisphere go to Data Protection > Mirrors, on the right select "Manage Mirror Connections"
2) Configure Write Intent Log, it's not a must have but you should strongly consider it. (if you have the drives and can meet requirements. If you are going to use MirrorView/A you will need to create RLP (reserved lun pool) .Read the MirrorView Knowledge book for more details.
3) At this point you are ready to create mirrorview pairs. Decide if you need to use consistency group functionality, where you group multiple LUNs into one group so they can be synced and fractured at the same time (important for application consistency, for database for example.)
kelleg
6 Operator
•
4537 Posts
1837
0
Posted August 2nd, 2016 09:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen