UNSOLVED

4uS98wTM8K12537

updated

14 years ago

0

969

July 1st, 2012 06:00

Backing up a VNXe 3300 to Tape

Hello everyone,

We have a VNXe 3300 and with the direct attached backup limitation, I am wondering what the best way is to backup the CIFS, VM Ware and iSCSI storage to tape? I have a Tape Library attached to a server currently running Netbackup.

Thank you for your help

  • paul_aviles

    31 Posts

    290

    1

    Posted July 3rd, 2012 17:00

    There are several ways possible, it all depends on your infrastructure, software and comfort zone.

    1) You can can use Netbackup and target the CIFS as any regular server as long as Netbackup has access to it.

    2) VMWare in both NFS and iSCSI luns you can use NDMP which is available on the VNXe and should be on Netbackup.

    3) If you have a Data Domain like the DD160/DD620 you can use the OST plugin and setup Netbackup to target the Data Domain. Then in Netbackup you can setup Netbackup to create clones from either the tape to disk or disk to tapes.

    If you have a fast tape unit you should have no issues with this configuration. We use an LTO 5 fiber Tape library and this works perfectly with 20 TB of storage.

    Really look into the Data Domain if your budget permits, those units are amazing and their support is out of this world!

    Regards,

    Paul Aviles

    www.nickelnetworks.com