UNSOLVED

L. Orlowski

updated

14 years ago

0

257029

April 11th, 2013 00:00

Latitude 10 ST2E: Sold recovery/installation media is not bootable (unless you buy the docking station)

Hi Community,

I am dealing with strange issues on my 2 weeks old Latitude 10 ST2E (Essentials model without the WACOM hardware and replaceable Battery).

Being worried that I may screw up the operating system and not wanting to rely on the Recovery Option (and also wanting that 6 GB of storage space reserved for the Recovery image) I ordered the "Replacement Media Disk" containing a Windows 8 Bit installation for 25€.This is a bootable 8GB read-only USB flash drive.

I wanted to give it a try despite having a functional system. Sadly it is not capable of booting on my Latitude 10. After selecting the drive through the boot device selection menu (after disabling Secure Boot of course), the Windows logo shows up for a minute or 2, then it switches to a ligh blue screen (no BSOD however) where it remains for another 2 to 3 minutes, and then the tablet shuts down.

I can use the flash drive to install Windows 8 once I have booted into the existing system where I run "Setup.exe" and that works perfectly.But that kind of defeats the purpose of a bootable media. Also the Stick has booted on another device (a Lenovo laptop) just fine.

Dell support in Germany has taken care of my problem and reproduced it on a test machine. They are also unable to boot from said flash drive. Their proposed solution for me is to buy the docking station (an ~160€ optional extra) in order to be able to administer my own device. 

Before I buy myself my own Version of Windows 8 32 Bit (unfortunatelly I have only the 64 Bit media) and try to boot that, could you be so kind and report on your own experience with installing operating systems on the Latitude 10?

Thank you and best regards

L. Orlowski

  • DELL-Sundeep B

    1 Rookie

    •

    874 Posts

    1838

    0

    Posted April 12th, 2013 07:00

    Hi L. Orlowski,

    Latitude 10 (ST2 and ST2E) only support booting to x32 bit UEFI images. They are built around a 32bit CPU core and cannot support booting  x64 bit UEFI. This is expected by design. A 32bit CPU will "not" boot a 64bit OS. Most of the instructions that are found in forums or other support sites only discuss how to build x64 bit UEFI images. These methods will not work for ST2 or ST2E.  DVD images to boot to USB Optical Disk Drives on the ST2 and ST2E must also be built for x32 bit UEFI boot.

    For creating a bootable USB device for reinstalling windows on Latitude 10 ST2/E, you may refer to the thread Here

    Hope this helps. Please reply if you have any further questions.

  • 1838

    0

    Posted April 12th, 2013 13:00

    The lecture about my ATOM CPU being 32 Bit and therefore not being able to boot a 64 Bit was kind of redundant. But thanks anyway.

    Thanks for the link! But are you telling me that I PAY for an installation media from Dell and afterwards I need to build my own? Hmm, what do I pay for then?

    Well I will try it. Maybe the Flash drive is not labeled correctly and in reality a 64 Bit? But then it would not be able to install from the running OS. So that can be ruled out.

  • DELL-Sundeep B

    1 Rookie

    •

    874 Posts

    1838

    0

    Posted April 17th, 2013 01:00

    Hi L. Orlowski,

    Thank you for checking me; apologies. My intent was to share the information in complete detail; realize that I could have been shorter.

    Regarding the OS media, please send me the order number and the name as it appears on the accounts via Private Message (Click on my name and clik on Start Conversation). Let me check if I could be of help.

    What you are suspecting may be correct; though very unlikely that the drive is labelled incorrectly. It is possible that despite a 32 bit flash drive the system may not boot if the partition of flash drive is NTFS. Latitude 10 ST2/E can only boot from a FAT32 media. You can try creating a 32 bit bootable media with FAT32 partition to install Windows on Latitude. Let us see if that helps.

  • Gary West

    1 Message

    1838

    0

    Posted May 31st, 2013 05:00

    Hi There,

    Was this ever resolved/confirmed please?

    I am struggling to boot a Dell Latitude 10 ST2 via USB

     

    Thanks and regards,

    Gary

  • hdfan23

    1 Rookie

    •

    29 Posts

    1838

    0

    Posted July 17th, 2013 15:00

    I believe you need to turn off Fast boot in the power options, that way you can access the boot up option.

  • 1838

    0

    Posted September 27th, 2013 08:00

    Hi there, I have a doubt with what you said, I understand that it support Booting from USB, there is a way to install another Windows version instead of 8, making a dual boot option or something?

    BR

  • anouar_3

    4 Posts

    1838

    0

    Posted October 6th, 2015 12:00

    hi there i know you post is 2 years old now , so sorry for bringing this up again . i have the same problem with my tablet , can you plz how to make a dual boot option or whatever .i really need to format this tablet and instal an other OS  in it .thks in advance and looking forward to it 

  • 1838

    0

    Posted October 7th, 2015 00:00

    Hello,


    I got rid of that device quite quickly due to other issues. Therefore I cannot verify if this is still the case. I also never managed to get my ST2 to boot with the Dell Windows 8 USB flash drive.

    I have never tried to boot my current Venue Pro 10 with another operating system.

    Best regards

  • anouar_3

    4 Posts

    1838

    0

    Posted October 10th, 2015 09:00

    hi there thks for taking the time to reply to me .i think i ll just give up on this *** tablet too