UNSOLVED

tomephillips

updated

22 years ago

0

5410

January 14th, 2005 16:00

SNMP Query of a PE server running OpenManage

I have installed OpenManage to a PowerEdge 6400.  All I want to do is to query the server with a third-party SNMP tool.  I've setup SNMP on the system (Win2k), installed OpenManage, and rebooted.  I still cannot get a reply to my SNMP query.
 
Is there something I'm missing or can someone point me to some instructions/manual for setting up the SNMP portion of OpenManage.  This use to be a lot easier in the earlier version - install the agent, configure the agent and then start querying.
 
I did not (and don't  want to) install the web server, so I will be doing the config by CLI.
 
Help??!??
 
Thanks,
  • jeeps00

    13 Posts

    329

    0

    Posted January 19th, 2005 11:00

    Make sure the SNMP Community name(s) is the set...
  • 329

    0

    Posted January 19th, 2005 17:00

    Yeah, the community names for the Microsoft SNMP service are set appropriately.  After nosing around on the box, I found NetIQ End2End server loaded and running.  It loads up its own SNMP Adapter/Agent.  Found out that that adapter had a different community string.  Once that was corrected, I am able to SNMP Query the box. 

    Eventhough I can see via an SNMP Query  the Intel, End2End, and Microsoft MIB info, I cannot see the Dell info.

    Any other ideas?

     

    Thanks,

    Tom