UNSOLVED

md-rick-o

updated

12 years ago

0

10183

February 11th, 2015 10:00

R415, need help with config BMC for LOM

We have a couple R415's (RHEL6) that we need to enable lights out management on. They weren't ordered with upgrade to dedicated DRAC interface so i'm trying to configure the shared interface access to BMC. How are we supposed to be able to access the system, ssh? I powered down the system and can't reach either IP, I've gone through the setup where i configured these options:

IPMI Over Lan         ON
LAN Params          

NIC Selection                          Shared with Failover LOM2
Active LOM                                LOM1 (not changeable)
VLAN Enable                            OFF
BMC Name                               Not changeable
Domain DHCP                         off
Domain Name                         here.lab
Host Name String                   system-lom
LAN Alert                                  Off

IPV4                                            Enabled
IPv4  address source             static
IPv4  address source             192.168.82.45
Subnet Mask                             255.255.255.0
Default Gateway                       192.168.82.1

System Services are Enabled
LAN user enabled to admin and password set.

I am now seeing the message System Services Update required (in the upper right corner with the F2, F10, F11 options).

  • 618

    0

    Posted February 11th, 2015 12:00

    Sorry, i found that i was missing the IPMI component. Never saw anything about it in the directions for setting up the BMC throught the CTRL-E menu op. I now have it working between two of our systems.

  • storm121

    1 Rookie

    •

    20 Posts

    618

    0

    Posted February 16th, 2015 01:00

    Mind sharing exactly what you had to do?

    What exactly is missing from the setup?

    Thanks