
UNSOLVED
D
Downloadkid
20 Posts
0
2554
August 28th, 2011 00:00
IT Assistant 8.9 discovery issues
Morning, I am having a bit of a nightmare trying to get ITA8.9 to work correctly.............where to start.
I have used ITA in its various guises for the past 6 years - to be honest I don't use it to it's full potential but I do use it to monitor system health as well as scheduled startups and shutdowns etc.
I have rolled out to server 2008 R2 which along with all other servers apart from a DC is now virtualised in VMWare - all that is working fine.
So I created a new VM for system management on which ITA 8.9 is installed. the old ITA system was also a VM but ran ITA 7.x with 7.8 OMCI - mostly that worked fine - discovery was via snmp. All clients, 350 plus, are XP SP3.
Firstly the OMCI MSI won't deploy via GPO - windows complains that it cant find the deployment information so I have had to install it manually on a few machines to test out ITA 8.9
Secondly even after creating a domain admin account with password, adding that account to the local admin group and assigning that account to be able to log on as a service on local machines the details of the managed system don't show properly - basically the client is found added to the list with a big grey question mark and that's it.
If I remove the 8.x OMCI agent and revert back to 7.8 it works but shows an error on the 'Global Agent' - no specifics so I assumse it just just doesn't like the older agent.
If I enable SNMP and reinstall the 8.x OMCI agent it works fine but reports it as a 'server' becuase SNMP is enabled.
So in summary I can't get the ITA to discover client Optiplex machines and pull the information just using CIM and secondly I can't deploy OMCI agent version 8.x via GPO
I've tried every combo I can think of so any help would be really appreciated....
Many thanks.
One more thing when I run the tests they all pass ; CIM; SNMP; DNS; DCOM
I have used ITA in its various guises for the past 6 years - to be honest I don't use it to it's full potential but I do use it to monitor system health as well as scheduled startups and shutdowns etc.
I have rolled out to server 2008 R2 which along with all other servers apart from a DC is now virtualised in VMWare - all that is working fine.
So I created a new VM for system management on which ITA 8.9 is installed. the old ITA system was also a VM but ran ITA 7.x with 7.8 OMCI - mostly that worked fine - discovery was via snmp. All clients, 350 plus, are XP SP3.
Firstly the OMCI MSI won't deploy via GPO - windows complains that it cant find the deployment information so I have had to install it manually on a few machines to test out ITA 8.9
Secondly even after creating a domain admin account with password, adding that account to the local admin group and assigning that account to be able to log on as a service on local machines the details of the managed system don't show properly - basically the client is found added to the list with a big grey question mark and that's it.
If I remove the 8.x OMCI agent and revert back to 7.8 it works but shows an error on the 'Global Agent' - no specifics so I assumse it just just doesn't like the older agent.
If I enable SNMP and reinstall the 8.x OMCI agent it works fine but reports it as a 'server' becuase SNMP is enabled.
So in summary I can't get the ITA to discover client Optiplex machines and pull the information just using CIM and secondly I can't deploy OMCI agent version 8.x via GPO
I've tried every combo I can think of so any help would be really appreciated....
Many thanks.
One more thing when I run the tests they all pass ; CIM; SNMP; DNS; DCOM
Responses (0)
Solutions (0)
