UNSOLVED

pmills4

updated

21 years ago

P

pmills4

7 Posts

0

13865

February 8th, 2006 13:00

How to prevent devices from showing up in unknown group

This is regarding to ITA 7.2

I have created a dynmaic group to list IPs that I know are network printers. How do I prevent them from showing up in the Unknown group so I can properly identify the other unknown IPs without going through the entire list?

Any help would be appricated.

Thank you.
  • pmills4

    7 Posts

    524

    0

    Posted February 8th, 2006 14:00

    They are HP printers.  the IPs do show up in the dynamic group I created but they also show up in the unknown group as well.  I would like for them to show up in the dynamic group only not in the unknown group.

     

  • tester25

    626 Posts

    524

    0

    Posted February 8th, 2006 14:00

    Okay, now I understand.  I'm 95% sure that there isn't a way to do that.  If I find a way to do it, I'll let you know.  That's a good idea for an enhancement to IT Assistant.
  • tester25

    626 Posts

    524

    0

    Posted February 8th, 2006 14:00

    Do all the printers have similar MAC addresses? If the printers are all of a certain brand, then you can likely restrict group membership using a query against MAC addresses that contain certain characters. Let me know if this doesn't make sense to you.
  • nuditarian

    36 Posts

    524

    0

    Posted February 8th, 2006 21:00

    This is a long standing deficiency of ITA, doubt it will ever change. ITA/OpenManage is not suited for non-homogenous network management. HP SIM is the best I've seen for free vendor specific support plus generic support via SNMP discovery, but of course that doesn't do much good in a Dell workstation/server environment. With the addition of simple query to sort custom groups, I can't for the life of me figure out why they insist on leaving the device in Unknown as well. It makes it impossible to monitor for uninstrumented Dell machines.
  • nuditarian

    36 Posts

    524

    0

    Posted April 21st, 2006 20:00

    Not really. The point that is missed by whoever wrote ITAssistant, is that if you are doing autodiscovery for devices, you need some way to classify non-Dell devices and remove them from Unknown. This way Unknown becomes a good measure of new/unidentified devices in your environment. Unknown should be where unclassified/uninstrumented devices end up UNTIL THE ARE CLASSIFIED OR INSTRUMENTED. Unknown is very usefull if it tells me what is unclassified/uninstrumented. As it is, it's useless since so much ends up there if your environment isn't 100% Dell. Hiding it would be no different from ignoring it, which is what I do now.

    When I look at Unknown right now, I've got several hundred devices there. I can't tell what is a printer, what is a switch, what is a router, what is a Dell Optiplex GX620 without OMCI. That last bit is the problem. I'd like to be able to look at unknown and say, "Hey someone deployed a machine without OMCI." Right now I can't, since I don't have time to dig through 400 devices and remember which ones weren't there last time I looked.
  • tester25

    626 Posts

    524

    0

    Posted April 21st, 2006 20:00



    @pmills4 wrote:

    They are HP printers.  the IPs do show up in the dynamic group I created but they also show up in the unknown group as well.  I would like for them to show up in the dynamic group only not in the unknown group.

     




    You can prevent the Unknown Group from being displayed in the Device Tree.  Go to Tools-User Preferences.  Then on the "Device Tree" tab, select "Customize group members".  Uncheck "Unknown".  Would that solve your problem?