UNSOLVED

guanabacoa

updated

17 years ago

G

guanabacoa

165 Posts

0

812

December 15th, 2009 08:00

Question About FA port Flags

Hi

I have a question about About FA port Flags, I have a DMX 4 and I need to change a FA port Flag

Disable_Q_Reset_on_UA(D)     : Disabled   to  Disable_Q_Reset_on_UA(D)     : Enabled

I have two questions

Fisrt One:

My command is as follows

set port 04A:0 Disable_Q_Reset_on_UA=Enable;

set port 13A:0 Disable_Q_Reset_on_UA=Enable;

symconfigure -sid 4018 -f file.txt -v preview

symconfigure -sid 4018 -f file.txt -v prepare

symconfigure -sid 4018 -f file.txt -v commit

Second one.

Changing this flag  do i need to turn off the FA?

Best regards

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    225

    0

    Posted December 15th, 2009 09:00

    your command syntax looks good. You don't need to turn off the FA, you just need to make sure that all hosts connected to this FA are ok with this flag. If you are not sure you could use "hba_mask" to only enable that flag for specific host(s).
  • cretika1

    7 Posts

    225

    0

    Posted December 16th, 2009 05:00

    Hello, the script looks good.


    And you should not need to turn off the FA.

    Anyway when you need to do this kind of thing in the symconfigure (preview) it will tell you if you need or not to turn that FA offline.

    Hope this works for you.


    Erika G.