UNSOLVED

pmenon5

updated

14 years ago

P

pmenon5

1 Rookie

•

96 Posts

0

3386

July 25th, 2012 01:00

Pool & Logs

IHAC - VMAX with 8 engines and 8 bay filled with 600GB FC

Pools are on Raid5. each pool has 64 spindles. Presented Data & Log ThinDevice luns from these pools (SQL / SAP application) for windows 2008 server.

Application team has come back to us saying performance is very low when they do microsoft speed test on these luns presented to their servers.

Latency is the issue. IT should be less than 10-20 ms as per their requirement. All allignement etc etc is taken care of at server side.

It is a new setup built about 5 months back.

Any best practice missing here from storage side?

If so can i have a validated document?

any suggestion to improve these?

Thanks in advance

Pras

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    762

    0

    Posted July 25th, 2012 03:00

    how many pools do you have and why are they so small (only 64 drives ? )

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    762

    0

    Posted July 25th, 2012 04:00

    interesting, have you or EMC looked at pool/disk/FA utilization ? Maybe pools are too small and you are working them too hard and need to buy more spindles to give you more iops.

  • pmenon5

    1 Rookie

    •

    96 Posts

    762

    0

    Posted July 25th, 2012 04:00

    16 pools and each pool configured with 64 disks as per EMC

  • Quincy561

    1281 Posts

    762

    0

    Posted July 25th, 2012 07:00

    That seems like more pools than needed for isolation, but I doubt the problem is a backend one, but it could be.

    First, are you using striped meta volumes?  And how many FA CPUs?

  • Quincy561

    1281 Posts

    762

    0

    Posted July 25th, 2012 08:00

    Ok, can you post STP data?  How many members?

  • pmenon5

    1 Rookie

    •

    96 Posts

    762

    0

    Posted July 25th, 2012 08:00

    Striped Meta...FA CPU's need to check

  • pmenon5

    1 Rookie

    •

    96 Posts

    708

    0

    Posted July 26th, 2012 05:00

    Logged case. EMC support investigating the issue.

  • RobertDudley

    2 Intern

    •

    448 Posts

    708

    0

    Posted July 26th, 2012 06:00

    What are you using for multi-pathing?  if its powerpath what does it show while running the test for pathing metrics?

  • pmenon5

    1 Rookie

    •

    96 Posts

    708

    0

    Posted July 26th, 2012 07:00

    Powerpath and it is sym_opt

  • 504

    0

    Posted July 31st, 2012 00:00

    @Pmenon5 you have mentioned that you have bound ThinDevice LUNs and have created Striped Meta.. This will cause a performance issue... For better performance Striped Meta should be used for THICK LUNs and Concatenated Meta Should be Used for THIN LUNs .. Backend layout of THIN Luns is different then THICK LUNs , IF you are using STRIPED THIN META then it means you are performing STRIPING on STRIPED LUNS which will give you less performance and in this case available spindles are not used efficiently.