UNSOLVED

Scott_M1

updated

15 years ago

S

Scott_M1

14 Posts

0

1161

March 27th, 2012 06:00

Enginuity Compatibility

Where do I look to find what Solutions Enabler and other objects in our environment are compatible with a particular Enginuity rev.?  I'm guessing there's some sort of compatibility or support matrix for this somewhere, I just can't find it.  Can someone point me in the right direction please?

Thanks.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    504

    0

    Posted March 27th, 2012 06:00

  • Scott_M1

    14 Posts

    504

    0

    Posted March 27th, 2012 06:00

    Thx.

  • Scott_M1

    14 Posts

    504

    0

    Posted March 27th, 2012 08:00

    I'm a bit lost still.  Ran the interop navigator, and everything I've tried still doesn't show me what Symm codes will run with which Solutions Enablers.  I guess I don't know which 'path' to run down once the navigator starts.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    504

    0

    Posted March 27th, 2012 10:00

    yeah, i could not find a good combo of objects either. Another option is to look at the release notes

    Home > Support > Technical Documentation and Advisories > Software ~ S ~ Documentation > Solutions Enabler

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    504

    0

    Posted March 27th, 2012 11:00

  • Scott_M1

    14 Posts

    504

    0

    Posted March 27th, 2012 11:00

    Surprise, surprise, surprise!   The release notes have a section discussing which Enginuity codes the Solutions Enabler rev supports.  It directs you back to ELab Navigator which is no help.  Not surprising at all.  Wow. 

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    193

    0

    Posted March 27th, 2012 12:00

    go easy on the caffeine there Scott

  • Scott_M1

    14 Posts

    367

    0

    Posted March 27th, 2012 12:00

    I'm In An Endless Loop draining all the CPU power and memory cycles from the Powerlink website!!!!!!!!!!!!!!!!!!!!

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    504

    0

    Posted March 27th, 2012 12:00

  • RobertDudley

    2 Intern

    •

    448 Posts

    367

    0

    Posted March 27th, 2012 12:00

    My powerlinkFU must be strong; actually it was easy.

    "Solutions Enabler versions required for Enginuity levels"  emc201214

    • Enginuity 5771 requires a minimum version of Solutions Enabler 6.2. However, it is recommended that you use version 6.5 or above due to fixes included in the later revisions of the software. See the latest Release Notes for details.  Reference emc120125 for what version of EMC mainframe software products are required for 5771.
        
    • Enginuity 5772 requires a minimum version of Solutions Enabler version 6.4. However, it is recommended that you use version 6.5 or above due to fixes included in the later revision of the software. See the latest Release Notes for details. Reference emc158134 for what version of EMC mainframe software products are required for Enginuity 5772.
        
    • Enginuity 5773 requires a minimum version of Solutions Enabler 6.5.  Reference  emc183935 for what version of EMC mainframe software products are required for Enginuity 5773.
        
    • Enginuity 5874 requires a minimum version of Solutions Enabler 7.0.  Reference emc213135 for what version of EMC mainframe software products are required for Enginuity 5874.
        
    • Enginuity 5875 requires a minimum version of Solutions Enabler 7.2.  Reference  emc267712 for what version of EMC mainframe software products are required for Enginuity 5875.