Were you able to verify that the drive is running in DMA mode and not PIO mode as John mentioned?
Unfortunately Dene you are correct, Dell has not released a firmware update for this drive, there is however a firmware that does work, which converts the Philips to a BenQ 1640 with good results, Catch 22, it viods the warranty on the drive.
Best Regards!
God, grant me the senility to forget the people I never liked anyway, the good fortune to run into the ones I do and the eyesight to tell the difference. CD/RW Link
the 800mb cdr for example isn't supported (which is SO weird), except when burning an iso with certain software not nero though. I think this is a firmware problem (and so might your situation be).
i have made a few coasters myself, but however hard i look, i can't find any firmware.
I have tried running a couple of CD's in my laptop...however nothing is being read. Nothing is playing, and I've had this computer for D600 for a 1.5 years with no problems. It uses a Philips CDRW/DVD CDD5263
Can someone direct me on how I might be able to resolve this problem?
clearly, you're not the only one.
Philips isn't that great in support (never has, probably never will be).
my advice: wait for dell or try finding it via windows' device manager and select your driver from the built-in ones ... if it's there.
sorry, I have been looking for my own philips drive too, to get a flash update to get it to burn 800mb cd's, no such luck.
it could be that philips lists it under another name...
I think they are not helpfull for preinstalled drives because they reckon that the support should be done by dell. and it should, but they take a loooong time testing. Same thing with my nvidia driver: dell publishes the version from 1956 while nvidia (at least they do suport properly) is up to date.
so ... like me you'll have to wait or void your warranty and go benq (which I'm not doing with my two month old super duper new dimension!)
I doubt you'll ever see a firmware update to allow 800mb CD burning. CD write strategies are pretty well case in stone as drive manufacturers concentrate on tweaking write strategies for new DVD media, including dual layer. A new firmware from Philips for the 8701 will add new write strategies for new DVD's or allow access to some of the additional features the Benq version has. Those features all realte to DVD's.
Except for music, where music DVD's are even making inroads, CD's are going the way of the 100mb Zip cartridge as a storage medium.
Predator
2 Intern
•
15286 Posts
245
0
Posted January 15th, 2006 11:00
Hi Michillio,
Were you able to verify that the drive is running in DMA mode and not PIO mode as John mentioned?
Unfortunately Dene you are correct, Dell has not released a firmware update for this drive, there is however a firmware that does work, which converts the Philips to a BenQ 1640 with good results, Catch 22, it viods the warranty on the drive.
Best Regards!
God, grant me the senility to forget the people I never liked anyway,
the good fortune to run into the ones I do and the eyesight to tell the
difference.
CD/RW Link