UNSOLVED

CodeSection

updated

21 years ago

0

4018

July 28th, 2005 18:00

Very slow boot after partitioned Inspiron 6000 using Partition Magic 8.0

If I have posted to the wrong forum, please let me know.

I bought an Inspiron 6000 1.86 GHz, 1GB Ram, 80 GB HD, Windows XP Pro and received it a week ago.  The only program I installed on it was Partition Magic 8.0.

The computer would boot up in about 45 seconds once I pushed the power button.  However, after I partitioned the HD, it now takes 3 minutes and 40 seconds to boot up.  Once it gets to the light blue Windows screen, I hear the Windows sound, but nothing changes and it then it takes 25 seconds to get to the “Dell” background screen.  Once I get to the background screen nothing else shows on it.  Then about 2 minutes and 25 seconds the icons appear.  Finally, after the icons appear, it takes another 20 seconds or so to load the task bar at the bottom.

This occurs every time I boot.  I tried changing the page file to another partition to see if that would help; it didn’t.  Currently my page file is static at 1536 MB.

I ran all the diagnostics I could: checked every hardware item and asked the Dell “E” smart support to look for problems.  Every thing passed.  Called Dell support and they could not help.  One tech mentioned they do not support multiple partitions.

Can anyone help?  On one hand I would like partitions, but the slow boot is very annoying.  I am even considering eliminating the partitions.

I appreciate all the suggestions you can give!

  • NemesisDB

    2 Intern

    •

    7944 Posts

    553

    0

    Posted July 28th, 2005 20:00

    did the cluster size happen to change?
  • 553

    0

    Posted July 28th, 2005 21:00

    I do not believe the cluster size changed.  I am not at the laptop roght now but when I checked it late last night, the cluster size was 2k.

    One additional comment, I installed diskkeeper pro and tried defraging and tried defrag on boot up.  Neither helped.

  • NemesisDB

    2 Intern

    •

    7944 Posts

    553

    0

    Posted July 28th, 2005 22:00

    i want to say that the default size should be around 4k, but it might depend on how big those paritions are.
  • rickmktg

    2 Intern

    •

    11898 Posts

    554

    0

    Posted July 28th, 2005 23:00



    @boingoboy wrote:

    First of all ...not a good idea to partition an 80 gig drive....it will slow your system to a crawl.dump Partition Magic....you should have just used fdisk..if of course you're starting with a clean drive....PM uses a few 'magical tricks'....in the way they format the partition....that's why your computer is slow.....another reason could be you don't have enough room for temp files on your main partition. for example, say you're burning a 4.7gig disk...you need another 4.7 gigs for your temp file while burning...If you're system ever crashes and you used partition magic..you won't be able to use the recovery console..it's not compatible with the way PM does it's magic. By the way...you do know that you've probably wiped out your recovery partition on that Dell, because they put it on your drive now....unless you are lucky enough to have received recovery disks....if you call Dell they're going to tell you to press an f key to take you to the recovery partition.

    I have PM on all my machines.  250gb drives, 200gb drives, 40s, 160s, ...  It doesn't slow anything. 

  • boingoboy

    14 Posts

    554

    0

    Posted July 28th, 2005 23:00

    First of all ...not a good idea to partition an 80 gig drive....it will slow your system to a crawl.dump Partition Magic....you should have just used fdisk..if of course you're starting with a clean drive....PM uses a few 'magical tricks'....in the way they format the partition....that's why your computer is slow.....another reason could be you don't have enough room for temp files on your main partition. for example, say you're burning a 4.7gig disk...you need another 4.7 gigs for your temp file while burning...If you're system ever crashes and you used partition magic..you won't be able to use the recovery console..it's not compatible with the way PM does it's magic. By the way...you do know that you've probably wiped out your recovery partition on that Dell, because they put it on your drive now....unless you are lucky enough to have received recovery disks....if you call Dell they're going to tell you to press an f key to take you to the recovery partition.

     

    Message Edited by boingoboy on 07-28-2005 07:39 PM

  • NemesisDB

    2 Intern

    •

    7944 Posts

    554

    0

    Posted July 28th, 2005 23:00

    eh, partition magic has its uses ...  and it's not possible to use fdisk to reduce a partition's size (unless MS has added some new features recently).
  • 554

    0

    Posted July 30th, 2005 05:00

    I have 4 partitions.  c: 15 GB, Swap File 1.5 GB static, Programs 4 GB and Storage 52 GB.  Everything shows as 4k clusters.  I have been on phone a good part of the day with Dell.  They want me to sign up for software support at $59 for 72 hours or $199 for a year.

    Since they want to charge me, my solution is to return the laptop tomorrow and order another one.  I guess it is cheaper for them to get a return rather than fix the problem. 

    Interesting enough, after a safe boot the sysytem goes back to "selective boot" where it uses the original boot.ini.  When this happened, the computere booted in about 40 seconds just like it did when I first got it.  However, a screen popup forced me to reboot in "normal" mode which then caused the slow boot again.

    I guess I will not use Partition Magic to partition the new system.  Any other suggestions?  I guess there is no harm to stay with a 80 GB HD.

  • NemesisDB

    2 Intern

    •

    7944 Posts

    164

    0

    Posted July 30th, 2005 05:00

    if it boots fast otherwise, it sounds like a program or driver problem -- again, this is likely not partition related.  why not do a clean install of XP and see if that helps?
  • Maine_Coon

    80 Posts

    554

    0

    Posted July 30th, 2005 05:00

    Like Rick said, PM doesn't slow anything. Moreover, you can uninstall it after you resized your partitions.
     
    My 80GB hard drive is divided into 3 partitions. It boots very fast.
     
    What I did:
     
    10gb for C: - OS and Program files;
    1.2gb for Swap file (1024MB), constant size ( I currently have 512MB RAM on my system, so it's twice the RAM size).
    the rest is for the data fies (video, MP3 etc.)
     
    Try it, you might like it.
     
    And yes, partitioning 80GB hard drive is all right if you know how to do it.
  • Maine_Coon

    80 Posts

    554

    0

    Posted July 30th, 2005 05:00

    Forgot to mention: cluster size for the swap file partition is 32K.
     
    Also, I don't have any Dell - installed programs, just clean XP SP1 install  plus quite a few progs I need.