UNSOLVED

Oceana Jones

updated

22 years ago

0

3225

September 27th, 2004 12:00

Trouble adding a DVD R to Dimension 8100

Hi, I bought a new DVD RW to add to my Dimension 8100. The computer came configured with a standard CD ROM. (jumpered to CS)  and installed in the top bay. I Jumpered the new drive to CS  and installed in the next lower bay. (using the middle data cable connection.) I am also using the data cable supplied with the new DVD Recorder. So far, I cannot get the computer to recognize both devices. What am I doing wrong? Thanks for any help you can provide. Oceana Jones.
  • Skybird

    1 Rookie

    •

    10871 Posts

    321

    0

    Posted September 27th, 2004 12:00

    Most likely the new cable that came with the new drive does not support
    Cable Select.  If you use the new cable, jumper one drive as Master and
    the other as Slave.  If you use the original Dell cable, jumper both drives
    as Cable Select.
  • 321

    0

    Posted September 27th, 2004 16:00

    Thank you Skybird! The advice you gave corrected my installation problem. I was following the instructions that came with the new drive, and no matter how I configured them, they would not work. Your advice to use the Dell supplied data cable and jumper the devices to CS fixed everything Thanks again! Oceana Jones