UNSOLVED

agglutinations

updated

22 years ago

0

6262

February 5th, 2005 14:00

Transfer contents of one hard drive to another

I have an old Dell Inspiron 3200. I'd like to transfer the contents of its hard drive to my newer computer, a Dell Inspiron 8000, but the problem is that the Inspiron 3200 is broken. The hard drive may also be broken, but I'm not sure. Is there a way of transferring the contents of my old hard drive to the new system in order to see whether the contents of the old system are still there? Thanks! -n
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    668

    0

    Posted February 5th, 2005 18:00

    Purchase an external USB drive bay and you can connect through the USB port.

    If you have a lot of data to move, you may want to buy a USB 2.0 PCMCIA card for the 8000 - USB 1.1 is painfully slow.
  • 668

    0

    Posted February 5th, 2005 19:00

    Will this solution work even if the motherboard on the Inspiron 3200 is broken? The problem is that I dropped it and the system won't start. The thing I want to see is whether the harddrive on the old Inspiron system is still intact. Thanks, N
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    668

    0

    Posted February 5th, 2005 20:00

    Yes, unless the hard drive has been damaged, it should work fine.
  • 668

    0

    Posted February 6th, 2005 04:00

    By "external hard drive bay" do you mean some sort of adaptor that can connect my old hard drive directly to the USB port on my new system? Where can I go to get what I need? Can I buy it from ebay? What kind of key word should I use? Thanks, N
  • jankerson

    2843 Posts

    668

    0

    Posted February 7th, 2005 07:00

    Well if you have a desktop then you can plug in the Laptop drive to one of you IDE channels and copy it that way.
  • meganerd

    13 Posts

    668

    0

    Posted February 7th, 2005 19:00

    The external cradle is a good option. You can find an example of one at http://www.atacom.com . Search for ME940U2
     
    I have a different one from compgeeks, but they did not have any for sale last time I checked them.
     
    MN
  • 668

    0

    Posted February 8th, 2005 14:00

    Thanks for all your advice. Question: do I have to take my hard drive apart in order to place it in the new USB driver?
  • meganerd

    13 Posts

    668

    0

    Posted February 8th, 2005 14:00

    You will have to remove the drive from the Dell caddy, which is very easy. Then you will have to carefully remove the Dell pin adaptor which is a plastic piece that is inserted over the pins on the hard drive. You have to do this carefully, as you can end up bending some of the pins if you are not careful. I have done this and bent a couple of pins, but have bent them back without problem. The drive case will have a receptable that the pins fit into. It is actually easier than it sounds.
     
    Maybe somebody here has a good procedure for removing the adaptor....
     
    MN