UNSOLVED

ladysman

updated

20 years ago

L

ladysman

3 Posts

0

4484

March 10th, 2007 22:00

Stop Codes 0x00000077 and 0x0000007a...Fixed!

Just thought I would share my problem and what fixed these codes from coming up on my Dimension 8400.

Problem:
PC would intermittenly just blue screen after 15 minutes of booting up. After a few reboots, it would quit doing it. I did all kinds of tests including ram and HD tests all which came out fine. I then pulled the new ram out and it still did it. I pulled out my TV card and still did it.
Funny thing is sometimes it would boot up and not do it for weeks and other times it would do it for 5-6 times in a row after powering it off. It was very weird.

Solution
After doing some reading here and elsewhere, I decided to replace the hard Drive. It was a 250gb maxtor that came with it and I had another 300gb maxtor I used for storage. I used Acronis Drive Clone and cloned the drive. I was worried it would BSOD in the middle of this but it didn't. When finished, I pulled out the old 250gb drive an wah lah, fixed. It hasn't BSOD since. Hopefully this isn't a coincedence but I am pretty sure it isn't because the last couple of weeks the old 250gb drive was making very nasty clunking noises and would freeze a lot. The new drive is also a 16mb cache drive and the pc is much faster but I don't believe it was because of the drives better cache. I think the old drive was in that bad of shape.

Hope this helps someone else. I bought a WD 500gb drive from newegg as replacement.
No Responses