UNSOLVED

infocus

updated

19 years ago

I

infocus

65 Posts

0

2535

May 26th, 2007 19:00

Slave Drive Reformat

I'd like to install and reformat a second harddrive without installing an OS,does anyone know about this.The plan is to use it for programs,picts.etc.I have an 8300.Thanks.
  • KNIGHT 26

    42 Posts

    208

    0

    Posted May 26th, 2007 20:00

    Hi
     
    If the Hard drive is physically connected.
     
    Then please follow the steps.
     
    1: Check if the Hard drive is seen in BIOS
     
    2: Go to Disk Management (start/ control panel/ Adminstrative tools/ Computer management)
     
    3: On the right hand bottom you will see the 2nd HDD
     
    4: All you have to do is right click on that you see format. Please click on format
     
    Regards
     
    Knight
  • shesagordie

    12 Elder

    •

    46017 Posts

    208

    0

    Posted May 26th, 2007 20:00

    infocus

    How to install a second IDE hard drive to a D-8300 system
    After the drive is installed, enter the BIOS setup and check that the drive is set to "Auto" [Enabled].
    In order for windows to recognize the second hard drive, it must be patitioned and formatted. These are generic instructions for installing an additional hard drive using Windows XP Disk Management, they are by Seagate, but apply to all brands.
    here

    Bev.







    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.