Hi, I'm trying install a second hard drive (WD3200AAKS)in my Dell E310. My system will not recognize the new drive. Does not show up in disk management or when I run Data Lifegard diagnostics. Is there something I am missing or is there something wrong with the drive?
Hi Bev, not sure I'm understanding about the auto on. I've never installed a secondary hard drive before. I was assured it was an easy task. Not so sure now.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
Message Edited by shesagordie on 12-05-2007 09:01 PM
You need to enter the Setup, F2 on bootup, see the 'System Setup Options' in link I posted.
Scroll down to 'Drives 0 through 1', highlight it and click 'Enter' to check the SATA drives.
In order for windows XP to recognize the second hard drive, it must be partitioned and formatted.
These are generic instructions for installing an additional hard drive using Windows XP Disk Management, they are by Seagate, but apply to all brands.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
lspstnd
10 Posts
168
0
Posted December 6th, 2007 00:00