I need to reformat a Dell Dimension 8400 but cannot find the SATA drivers.
I've done it before & the drivers I needed were on the resource CD that came with the computer.
I can't find the drivers on the version of the Resource CD that came with this one though.
*edit*
Ok, I found them on intel's site & in the file library now. It wasn't clear the floppy version of the intel application accelerator was what you needed. It would be very nice if that was explained in the re-installation guide.
Phill
Message Edited by phillwooller on 03-21-2005 06:51 AM
The DOS version didn't work as the files were missing from the CD. I didn't have another 8400 & didn't want to install the 8400 software on my laptop to use the windows version.
Should be able to find it on Dell site. On my XPS Gen 2 it works, by executing the Pre-OS RAID Driver exe file. It then prompts or writes to the floopy disk.
Once you created the driver diskette. Press F6 shortly after booting off the OS CD. When prompted enter "S" and insert diskette. Load the proper driver and you should be good. When you installed the OS, chipset driver, sound driver, video, etc, and then load the Intel Application Accelerator to complete the re-load.
I think Dell may have a re-install gude to give you the details.
phillwooller
28 Posts
187
0
Posted March 21st, 2005 13:00
The DOS version didn't work as the files were missing from the CD. I didn't have another 8400 & didn't want to install the 8400 software on my laptop to use the windows version.
Phill