I just acquired a Dimension 4300 as a hand-me-down which I would like to network with my Dimension 4550. My 4550 is running Windows XP SP2 and the 4300 has Windows ME. I've heard that ME is very NG and so thought I would upgrade to XP, and then there are many applications to install, all of which takes time. I recently replaced the hard drive in my 4550 with a 160GB WD drive and have been trying to decide what to do with the old drive which is nearly full but working fine. The question is...can I replace the drive in the 4300 with the old drive from the 4550? Is it a simple matter of just removing the old drive and replacing it with the new one? Both systems are compatible with ATA-100 Ultra DMA drives.
In the Device Manager Control Panel on the 4300 the drive is described as
"generic IDE disk type 55" (40GB) The drive from the 4550 is a WD400BB IDE drive. Would I need to update the system BIOS which is currently version A02?
Upgrade the BIOS before swapping the drive. The hardware will directly transfer - you will, however, have to reformat and reload Windows once you've done so; an XP install from a 4550 won't boot in a 4300.
Yes, and yes. When you install Windows onto a hard drive, a custom set of data and drivers is generated based on the hardware in the system. It is very difficult - often impossible - to move a drive with a specific set of drivers from one computer to a foreign model.
You will have to start over - a drive built in a 4550 will simply blue-screen and halt when you try to boot it in a 4300.
And here I was thinking I could just pop in that old drive with XP and all my app's and files and save all the time to install same. Too bad life's not so simple.
I've decided to use the old drive from my 4550 as an external drive but want to upgrade the 4300 which is currently running Windows ME to Windows XP pro. Eventually I will be networking the two computers together.
Can I use the XP disc from my 4550 to install on the 4300?
Can you suggest a resource for instructions on installing XP?
I've never installed an operating system before an want to be sure to do it right.
I've decided to use the old drive from my 4550 as an external drive but want to upgrade the 4300 which is currently running Windows ME to Windows XP pro. Eventually I will be networking the two computers together.
Can I use the XP disc from my 4550 to install on the 4300?
Can you suggest a resource for instructions on installing XP?
I've never installed an operating system before an want to be sure to do it right.
1) No, you cannot use the Dell OEM XP disc from the D-4550, to install XP on a system that has WMe factory installed. You need to buy an upgrade copy of XP and use the WMe disc, as qualifying media.
2) This is an excellent
guide for a clean install of XP.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
Could you please, post the answer you receive from MicroSoft.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
Well here is the answer from Ken Blake, I got three other responses-all the same.
"No.
A CPU is not a computer. A CPU is a chip within the computer. Although
most computers have a single CPU, some have two CPUs for increased
performance.
Windows XP Professional can run on a computer with two CPUs, and use
them both. XP Home, however, can use only a single CPU.
The license restricts your copy of XP to a single computer, regardless
of how many CPUs it has.
'The license restricts your copy of XP to a single computer, regardless
of how many CPUs it has'
Thank you, guess that gives the answer, one computer only.
Bev.
===================================================
Please don't send me questions about your system by DCF Messenger.
Post the issue in the appropriate Board, where they will be answered.
ejn63
11 Legend
•
87469 Posts
•
321256 Points
664
0
Posted August 3rd, 2007 10:00