UNSOLVED

ramanujan

updated

24 years ago

R

ramanujan

2 Posts

0

28478

May 7th, 2003 12:00

Perc 320/DC degrades Raid 0 array

Hello,

I got some serious problems with the Perc 320/DC in our Precision 650 Workstation. We have these workstations running for 4 weeks now and 3 of our 6 workstations have problems with the raid 0 array. I get a blue screen under windows XP (Kernel_stack_inpage_error; improper termination or defective cabling on SCSI-based devices). When i reboot the computer, the raid controller reports that the array has a missing member, but both harddrives are running smoothly... 2 of controllers have set the array status to 'degraded' one has set it on 'phantom'.

Is there a possibility to reset the array status to 'optimal'? (both hdd's are ok, so theoretically that sould be possible)

Is there perhaps an incompatibility between Precision 650 and the Perc 320/dc? There's a firmware-update for the adaptec-equivalent of this controller that solves a problem with intel-chipsets.

Any idea what i can do to fix my computers?

 

  • chris_v

    1 Message

    827

    0

    Posted June 24th, 2003 15:00

    I have the same problem with a Precision 450.  DELL HELP!!!
  • ramanujan

    2 Posts

    827

    0

    Posted June 25th, 2003 05:00

    Dell Support finally found out that there are some serious problems with the Dell Perc/320 in conjunction with Seagate Harddisks. A Bios update of the Controller didn't help. There is a Bios update for the Seagate hdd's with 10 000 rot/min that should solve the problem, but we use the 15 000. (btw, the update would delete all your data)

    We finally returned the perc/320 and the two 36GB hdd's and now use a single 72GB hdd :(

    The Bios updates are not yet available on the Dell support pages, we got them mailed from the support...

     

  • spitanga

    3 Posts

    827

    0

    Posted July 18th, 2003 11:00

     

    I have the same issue.  I have a three weeks old Precision 650 running perc 350 - 3 drives raid 5.  2 drives are unavailable to the raid set.  I ran extensive tests and the drives checked out fine.

    Message Edited by spitanga on 07-18-2003 08:00 AM

  • PapstBios

    1 Message

    827

    0

    Posted January 15th, 2004 18:00

    I got exactly the same problem with the same system today.

    I called Dell and they have no idea how to fix the problem that two of three working disks are unavailable to a RAID 5.

    The only idea from Dell is that maybe the controller is damaged which I do not really beleave. For me It looks like there is a Bug either in the controller Bios or in the Firmware of the Fujitsu disks.

    There is no possibility to force the disks back into the raid neither in the controller bios nor in the Windows Software.

  • spitanga

    3 Posts

    827

    0

    Posted January 15th, 2004 19:00

     

    I took out the raid card and configured the disks as stand alone.  I was simply was not convinced this problem was resolved.  Dell support was not helpfull in this issue.  The new workstations I bought I used the IDE Raids, cheaper and apparently more stable.

  • 827

    0

    Posted June 10th, 2004 20:00

    I have the same problem...

    When I use the BIOS config utility to Manage the Array, if I select the REJECT prompt and vieew it in Read-Only mode all the Array#0 details are visible. It indicates an Array Status of PHANTOM. However, when I choose the ACCEPT option on the config utility and attempt to manage the Array#0 I get an error message indicating 'No Arrays Present'. Both drives are there and check out OK when I Verify through the Disk Utitlty.

    I have a new controller on the way. Any ideas?

    Thanks,
    January
  • jestin

    6 Posts

    827

    0

    Posted December 7th, 2005 06:00

     

    We too have the same problem and exactly the same message. I am surprised to see that this thread is 2 years old and still the problem exists on Dell-670 with Dual Xeon 3.6, PERC320/DC configuration.

     

    Also, that I don't see any answers for this!!

  • baldrick123

    1 Message

    827

    0

    Posted October 22nd, 2009 06:00

    Just encountered a similar problem on Precision 670 with PERC 320/DC running two seagate drives,  RAID 1.

    The system froze, was restarted and that was that - no longer bootable.   Dell seem to be reluctant to acknowledge this thread.  They pointed me to the hard disk firmware upgrade which I've done.  I get blue screen of death when I try and reinstall XP so I'm low level formatting the disks.  Looks like it really scrambled the disks.

  • dneuwir

    17 Posts

    827

    0

    Posted March 24th, 2010 18:00

    So here we are in March, 2010, and I'm encountering the IDENTICAL issue on a Precision 470, fresh install of Windows XP.  Got Windows and all drivers installed, all Windows Updates run, Maxtor 15K firmware updated on all drives, latest released drivers, blah blah blah. 

    Got done.  Ran Defrag.  "Clunk".  Array degraded.  This is a 3-drive RAID-0 array.  All 3 drives appear to be operating fine, the stupid controller just won't "hold" the array. 

    HAS ANYONE AT DELL SOLVED THIS?!?  Reading the forum, this sounds like a systemic issue affecting this controller and a whole lot of people.  Even in 2010 this 3.6 Xeon system is substantially faster than most of the machines sold today and it'd be a shame to throw away a $3500 (originally) computer over a systemic and known defect.

    Anyone found a more recent PERC 320/DC firmware?