New western digital slave drive in dimension 4550 is incredibly slow.
I just recently added an 80gb western digital drive with 8MB cache to my dimension running win xp in slave mode. I installed the drive just fine through the disk management utility in the control panel. However, when I try to play back video files on the new drive, it runs incredibly choppy, like the hard disk is struggling to provide the media player with video. Also, copying massive files to the new drive 5GBs seems to take a couple hours when doing the same to my primary 30gb drive happens quickly within 15 minutes.
2) Did you attach the new hdd to the same IDE cable that your CDrom is attached to? (the bus only works at the speed of the slowest device)
3) Is it an external USB drive? perhaps it is USB2.0 or 1.1?
WD has some tools (especially for XP) to test your drive. I recommend trying those. if it didn't come with your drive, you can download it from their website. come to think of it, I bet you'd find an answer if you searched their knowledge base at their website. good luck.
I just had this exact problem with a new slave 250 GB drive in a dimension 4600. It turned out to be dofus125's third idea. Make sure the bios is set to auto detect for the 2nd hard drive (and a second optical drive if you have one of these). Now the new drive is faster than the original 80 mb Maxtor drive.
for a while..i thought this was normal as i have a friend who also gets choppy playback on his secondary drives..i thought it was a windows crutch that it would copy files from secondary drives to primary drives whenever you wnated to read something from a secondary drive...i guess not
btw..when downloading files ussing the windows utility...does it ever do that if you tell it to save to a secondary drive...save first to primary drive and then copy it over to secondary once its finished because i recall somethign like that happening before
i couldnt download a file to my secondary drive because my primary didnt have enough space to hold it.....
doofus125
1 Rookie
•
15 Posts
222
0
Posted March 7th, 2004 23:00
3 things to check,
1st, make sure your first hard drive is set to Master if the new drive is set to Slave, Dell sets their drives to Cable Select by default.
2nd, do you have the proper cable attached (is your 30 gig drive the same type of drive, SATA, ATA, IDE, etc).
3rd, in the bios is the drive set to auto?