UNSOLVED

happy11402

updated

18 years ago

0

6812

July 9th, 2008 17:00

I need help with my Dell Dimension 4700

I need help with my Dimension 4700....Please!  It was delivered running XP Home with 80GB hard drive, a CD-RW/DVD drive and a DVD RW drive.

 

My original 80GB SATA hard drive crashed a couple of weeks ago(Blue screen errors).  In the process of running diagnostics on the machine I also discovered that my CD-RW drive was malfunctioning!!!  I bought a second DVD RW drive to replace the CD-RW and a 500GB SATA to replace my 80GB.  Now when I run diagnostics I see no errors and I can boot up from CDs.

 

My problem is getting the new hard drive loaded up and running...(Back to the factory set up)  I boot from the windows CD that came with the machine and when the windows set up starts I get an error that says

 

"FILE \i386\NTKRNLMP.EXE Could not be loaded."

The error code is 1024

 

Can anyone out there provide me with step-by-step instructions to get this thing back running??  I have all discs that Dell furished at the time of delivery.  I really need to get this machine up and running ASAP as it is the only PC I have access to other than this one at work.

 

Also I am hoping that my old drive has only lost the boot sector and by hooking it up as a secondary drive (After the machine is up and running) I might be able to recover some of my JPG & data files.  Is this reasonable or possible???

 

I am pulling out what little hair I have left so any help would be GREATLY appreciated......

 

  • clark_styx

    61 Posts

    211

    0

    Posted July 9th, 2008 19:00

    you can check this out http://support.microsoft.com/kb/318729
  • 211

    0

    Posted July 9th, 2008 22:00

    I checked out that link and the info it gives is for that same file name but with a different error code..  The info is for error code 7.  Mine gives error code 1024.

     

    But I did read the page and the info for error code 7 indicates a problem with the BIOS or RAM modules.  In my case, when I go into setup, the system detects and lists the proper amount of RAM and it detects the new hard drive and lists the specific model number and it's capacity.

     

    Wouldn't that tell me that the new drive and RAM are both OK and compatible with my system???

  • 211

    0

    Posted July 14th, 2008 13:00

    I don't know what I did different, but about the 10th time I tried to install XP from the Dell CD IT WORKED!!! 

     

    Now I am just trying to recover my files and pics from the old drive.  I have it hooked in, and can read it, but the security won't let me get to the files I need!!!

     

    Someone suggested I get ahold of "SCESP4I.EXE"  I finally found the file but haven't had a chance to run it yet. 

     

    Am I on the right track????

  • shesagordie

    12 Elder

    •

    46017 Posts

    211

    0

    Posted July 14th, 2008 18:00

    happy11402

    See if this can help.

    Note: If you are using XP Home, then this must be done from Safe Mode.

    Bev.


    ===================================================
    Please don't send me questions about your system by DCF Messenger.
    Post the issue in the appropriate Board, where they will be answered.