UNSOLVED

stevespace_9

updated

17 years ago

0

14242

June 22nd, 2009 08:00

How do I install a new master harddrive on my Dimension 3000 without software (please easy)

I want to install a 40 GB IDE harddrive on my Dimension 3000 and I don't have software with it. Is there an easy way for a novice computer person?

Thanks,

Steve

  • jackshack

    6447 Posts

    474

    0

    Posted June 22nd, 2009 09:00

    You must have the reinstallation CD for your operating system in order to accomplish this, or you can clone your existing hard drive (assuming it still works) using a program such as Acronis True Image or Symantec (Norton) Ghost.

    If I were you, I would request the CDs from Dell using this form:  Dell Backup CDs.  During the period that the Dimension 3000 was available, Dell had a policy to reduce the number of disks shipped with their machines.  Customers got the CDs only if they were specifically ordered with the computer, or requested from Tech Support as the result of a problem.  You will almost certainly need the reinstallation CDs sooner or later, so it would be best to ask for them while they may still be available.

    Edit:  Incidentally, you should consider editing your post to remove your e-mail address.  This is an open forum and the addresses are subject to harvesting by spammers.

     

     

  • speedstep

    11 Legend

    •

    46969 Posts

    474

    0

    Posted June 22nd, 2009 10:00

    You can request a free set of backup disks
    directly from Dell by filling the form out located here:

    https://support.dell.com/support/topics/global.aspx/support/dellcare/en/backupcd_form

    You can Clone to a newer drive using a Drive wire.

    Dell Drives are Not Master or Slave they are set Cable Select.

    http://accessories.dell.com/sna/products/Hard_Drives_External/productdetail.aspx?c=ca&l=en&s=bsd&cs=cabsdt1&sku=A1287050

     Overview

    DriveWire is the ideal solution for transferring the data from a desktop or notebook PC to a new hard drive in a few easy steps. It makes what can otherwise be a daunting and tricky process, painless and easy. DriveWire is bundled with Apricorn's "Upgrade Suite" which features the award winning "EZ Gig II" cloning software for Windows and "Shirt Pocket's SuperDuper!" for Mac. When used together, DriveWire makes it easy to transfer your OS, data, applications, documents, address books, e-mail, settings and preferences - from the old drive to a new drive, in few easy steps. Start by attaching the new 2.5" or 3.5" hard drive to the appropriate connector on DriveWire's cable head. Then connect the AC power adapter and the USB cable. Now, boot up your computer using the "Upgrade Suite" bootable CD and make and exact clone of the old drive onto a new drive. After the transfer is completed, install the new hard drive into the desktop or notebook, and the computer will boot up just like normal. DriveWire includes Apricorn's Upgrade Suite with EZ Gig II Cloning & Upgrade software for Windows and Shirt Pocket's SuperDuper! for Mac, a hybrid adapter that connects to any 2.5", 3.5" IDE/PATA or SATA Hard Drive, USB 2.0 cable (USB 1.1 compatible) and high quality UL Listed power adapter. This unique adapter provides a SATA connector for the new style drives as well as 44 pin connector for a 2.5" Notebook IDE/PATA Hard Drive and 40 pin connector for a standard 3.5" IDE/PATA Hard Drive, allowing you to connect a hard drive to any desktop or notebook computer with a USB 2.0 port. This is the perfect solution for anyone needing immediate or temporary access to a Hard Drive. You won't need to buy a different enclosure for every Hard Drive or worry about whether or not you have enough power through your USB ports run the device. Because DriveWire is guaranteed to safely provide all the power you need and it is compatible with all of today's 2.5, 3.5 IDE/PATA or SATA Hard Drives. W

    Manufacturer Part# : ADW-USB-KIT
    Dell Part# : A1287050

     

     

     

  • 474

    0

    Posted June 22nd, 2009 10:00

    Thanks for the reply.

    I have my operating CD Windows XP Pro SRVC pac 2.

    As far as contacting Dell. They charge for everything. At present I am unemployed so spending a lot of money on Dell items is not in the forecast.

    Having my operating system CD, is that enough. Will my computer recognize most of the harddrive space. Do I have to do anything with the BIOS?

    Thanks again,

    Steve

  • 474

    0

    Posted June 22nd, 2009 11:00

    thanks for the reply speed.

    I plan to install the operating system on the bare drive. I don't plan to transfer or clone anything. so I ask, what is the easiest way to do this.

    Steve

  • jackshack

    6447 Posts

    474

    0

    Posted June 22nd, 2009 11:00

    The minimum you need is the OS reinstallation CD that you already have.  You will need to boot from this disk so that you will be allowed to delete any existing partitions and recreate at least the partition you plan to use for your C drive.  Most of the Windows setup process is easy to follow; once you have booted from the CD you will be asked a couple of times if you want to set up Windows, you will naturally select the option to set it up.  You will be asked to accept the End User License Agreement (EULA), press F8 to do so.  The next screen should display any partitions that may exist, or tell you how much unallocated space you have if there are none.  If you are interested only in a C partition for the entire drive, you can select the option to install Windows in the unallocated space.  At that point the necessary partition will be created and formatted, followed by Windows set up.  If you are using a Dell reinstallation CD you should not need to worry about entering the code from the COA as the installation will be automatically activated.  If you are using a commercially purchased CD you will enter the code from the package that contained the CD.

    Before you actually install, you should take steps to acquire the device drivers for your machine.  On Dells, the drivers are typically installed in C:\Dell\Drivers.  If you save these to CD or other alternate media before you begin you will retain the original drivers that shipped with the computer.  You may also find the drivers for your computer here:  Dimension 3000 Win XP Drivers.  You may also have the Dell Resource CD that contains the drivers.  The one advantage of using the Resource CD is that it installs an application that helps you determine which drivers you need to install.  When you install the drivers you need to install at least the first two in this order:  Dell Desktop System Software (found in System Utilities), and the Intel Chipset Driver.  Dell recommends you follow these with the video adapter driver, the network (Ethernet port) adapter driver, and the Sound adapter driver.  The remaining drivers can be installed in pretty much any order you wish.

  • speedstep

    11 Legend

    •

    46969 Posts

    474

    0

    Posted June 22nd, 2009 11:00

    Download and save the Dell drivers for

     

    1. Chipset

    2.  Nic

    3.  Audio

    4.  video

    Make sure to install chipset drivers after the base install of xp.

    Then reboot.

    Then install video drivers.

    Then reboot

    Then install Audio drivers

    Then reboot

    Then install NIC drivers

    Then reboot.

    Hours not minutes if you arent cloning.

     

  • shesagordie

    12 Elder

    •

    46017 Posts

    474

    0

    Posted June 22nd, 2009 15:00

    stevespace_9

    The directions for manually installing XP from the Dell reinstallation disc, are HERE

    Bev.