
UNSOLVED
Help! New M1210 cyclic redu. error on DVD+Rs - strange recurring pattern
I have a new (winter 2006) XPS M1210 notebook with a TSSTCorp DVD+RW TS-L632D writer built in. Here is the strange issue - I burned 5 8xDVD+Rs at 8x with 300 of the same files. When I read the burned discs (in either the same drive, or on my desktop computer's DVD-reader), I will always get the SAME cyclic redundancy error occurring on the SAME 20-30 files on each of the 5 identical burned discs. I tried with a different set of 400 files burned identically on 5 more DVD+Rs - same problem - a specific set of 20+ files on every disc is unreadable and gives me the cyclic redundancy error (even when read on other computers). So I tried the same media on my desktop system instead to compare. I used the exact same package of DVD+Rs (Memorex 8x DVD+Rs) on the same operating system (XP Pro SP2) with the same version of Nero (7.0.1.12) and burned the EXACT same set of 300 files using the same file structure. 5 of my 5 discs burned on the desktop are 100% readable with no cyclic redundancy issues when read on either the desktop or the notebook! So the problem doesn't appear to be the media (unless the TSSTCorp writer is having particular issues with the Memorex media). The software doesn't seem to be the issue as I used the exact same version of burning software under the same OS in either case. I thought that if it was the TSSTCorp writer's hardware failure, that it would leave random/different unreadable files with each subsequently burned disc, but instead it always 'fails' on the same 20-30 files out of the whole set. Could this be a firmware issue? Or is this a DVD-writer issue? I'm at a loss. Any help would be appreciated. As a side note, my XPS M1210's TSSTCorp writer also has issues with a number of plain CD+Rs (ie. it refuses to recognize or write on high quality 700MB TDK CD+Rs for some reason)... - James
Responses (3)
Solutions (0)

Skybird
1 Rookie
•
10871 Posts
194
0
Posted June 11th, 2007 17:00
you are having CDR with TDK, it could be a sensitivity of the drive.
There is a Firmware update here ...........
http://support.us.dell.com/support/downloads/download.aspx?c=us&cs=19&l=en&s=dhs&releaseid=R145166&formatcnt=1&libid=0&fileid=193445
Memorex DVD media has proven to be one of the most troublesome media
available. If possible, try a known good brand, such as Verbatum, to
see if that exhibits the same problem.
Finally, if the Firmware does not help, run the Dell Diagnostics for the
drive. You will need a known good DVD with data on it to test the drive.
Message Edited by Skybird on 06-11-2007 12:59 PM