UNSOLVED

lixuelai

updated

23 years ago

L

lixuelai

19 Posts

0

1274

April 22nd, 2004 22:00

HD prevents booting...

My printer server's HD failed a month or so ago and i recently got hold of a similar sized HD from a friend. The computer is a rather old Dimension XPS450. The original was 12 gig Maxtor the "new" one is a 15 gig Maxtor Fireball ICT 15. When i tried to boot from a floppy disk (ie partition drive) I get this blinking cursor  where the boot options would be.  I tried booting from CD and the same thing happened. I also changed the boot sequence and that failed too. The BIOs detects the drive to its proper size. BUT, when i remove the drive, the pc boots fine. This leads me to think failed drive but i am pretty sure the drive is OK. I am very lost on this. It is very hard to do anything when u can't even get the computer to boot. Thanks.

  • lixuelai

    19 Posts

    454

    0

    Posted April 23rd, 2004 01:00

    Oh and i did everything else u said. Still same problem. This is driving me nuts. I thought maybe the HD was not supported but now the article...
  • lixuelai

    19 Posts

    454

    0

    Posted April 23rd, 2004 01:00

    This is getting wierder. Does anyone know for sure whether Quantum ICT 15 is compatible with Dimension XPS R450? I know that there were some conflicts between P2 motherboards and some older HDs. Gonna have to check on this. As for the self tests. When i do the seek test and just about it is done, the numbers starts to flicker. For example lets say it is testin 1000. When it gets to 999, somehow it keeps switching from 000 to 999 yet never completing the test. Ah this is REALLY driving me nuts...
  • lixuelai

    19 Posts

    454

    0

    Posted April 23rd, 2004 01:00

    The jumper setting is right and as of now iv gone throught 3 tech support personels. Just give u an idea how wierd this is: I managed to partition and format the drive but after installing the OS. I get this flashing cursor after Press Any Key to Boot from CD-ROM. System just hangs there. Also, this HD is like no other. I can't hear any noise inside (IE the clicking sounds when the drive is working) yet i don't see how i managed to format it :S If this doesn't get solved ill just have to put it into my "unsolved mystery of life" i guess :S

  • DELL-Donald K

    2 Intern

    •

    3969 Posts

    454

    0

    Posted April 23rd, 2004 01:00

    Boot to the resource CD, run Dell Diags on the hdd


    DELL-Donald K
    #IWork4Dell

  • DELL-Donald K

    2 Intern

    •

    3969 Posts

    454

    0

    Posted April 23rd, 2004 01:00

    It is likely the drive is not jumpered properly.  Dell systems are set for the drive to be jumpered CABLE SELECT. 

    http://docs.us.dell.com/docs/storage/53udx/jumpers.htm

    It should also be connected to the END of the Dell IDE cable. 

    If the drive is jumpered properly, check the bios to ensure you have the boot sequence with the floppy drive 1st.


    DELL-Donald K
    #IWork4Dell

  • lixuelai

    19 Posts

    454

    0

    Posted April 23rd, 2004 02:00

    God, this is just great: "quietest drive in the world". Oh man, just when i need some sound to see whether it is actually working. I get the "quietest drive in the world". Life doesn't get any better than this :S