UNSOLVED

JustAGuyAtWork

updated

21 years ago

0

14979

June 1st, 2005 13:00

GX280 & USB HASP key crashes PC

I have an application that needs a USB hardware key in order to run. The app is Paradigm C++ devlopment tools.
 
The USB key is from Aladdin and is v4.96, but after installing the driver the PC "crashes" when I plug the key in. I receive a popup balloon recognizing the key, the key's LED turns on, two more balloon messages popup, then the PC restarts!!!!!! If I don't remove the USB key, the PC enters an endless cycle of restarts...
 
Paradigm C++ technical support is trying to help, but they are not having any luck resolving the issue. The even sent me a newer HASP driver to install... that didn't work either.
 
Running Win XP Pro w/SP2.
 
 
  • speedstep

    11 Legend

    •

    46969 Posts

    838

    0

    Posted June 1st, 2005 17:00

    Try adding a powered Hub. One with a 5v 3 amp wall jack.

    Or a DRBOTT Semi Powered Hub.
  • 838

    0

    Posted January 4th, 2006 22:00

    I'm having the same problem with any USB Thumb drive.  As soon as I plug in the drive my system reboots.  This happens on all of our 280's but not the older 110's. 

    Is it a problem with the ports not having enough power?

  • 838

    0

    Posted January 5th, 2006 18:00

    I resolved my original issue which was a crash due to plugging in a USB hardware key. The cause was apparently caused by the driver from my external CDROM which has a USB connection.
     
    I removed my Micro Solutions backpack CDROM driver, then re-installed the HASP device driver and it worked fine.

    After that, I re-installed the latest Micro Solutions backpack CDROM driver from their site and remarkably, it still worked!
     

    I also had another problem that crashed PC with a parallel port connection I was using. This too was caused by the external CDROM "Backpack Finder driver" which automatically "scans" the parallel port for a new connection. I disabled the scanning and now manually tuirn it on when needed.
     
    Good Luck... your mileage may vary ;0
     
    Chip
  • 838

    0

    Posted January 8th, 2006 20:00

    This still didn't help.  We have nothing external attached to the systems and it is happening on all of our 280's but none of our other systems(260's, 270's, 110's).

    It this a known issue with the 280's??

  • 838

    0

    Posted January 9th, 2006 11:00

    BTW... I have used at least 5 different USB thumb drives (on front USB ports) without any issues.

    My system:

    Windows XP Professional w/ SP2
    System Model OptiPlex GX280 SFF
    Processor x86 Family 15 Model 4 Stepping 1 GenuineIntel ~2992 Mhz
    BIOS Version/Date Dell Inc. A04, 2/9/2005
    SMBIOS Version 2.3
    Total Physical Memory 1,024.00 MB

    USB info:
    HID Keyboard Device HID\VID_413C&PID_2003\6&2BFA585A&0&0000
    HID-compliant Wheel Mouse HID\VID_046D&PID_C016\6&F35D5CC&0&0000
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2658 PCI\VEN_8086&DEV_2658&SUBSYS_01791028&REV_03\3&172E68DD&0&E8
    Intel(R) 82801FB/FBM USB Universal Host Controller - 2659 PCI\VEN_8086&DEV_2659&SUBSYS_01791028&REV_03\3&172E68DD&0&E9
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265A PCI\VEN_8086&DEV_265A&SUBSYS_01791028&REV_03\3&172E68DD&0&EA
    Intel(R) 82801FB/FBM USB Universal Host Controller - 265B PCI\VEN_8086&DEV_265B&SUBSYS_01791028&REV_03\3&172E68DD&0&EB
    Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C PCI\VEN_8086&DEV_265C&SUBSYS_01791028&REV_03\3&172E68DD&0&EF
    USB Human Interface Device USB\VID_413C&PID_2003\5&3AC511E3&0&2
    USB Optical WheelMouse USB\VID_046D&PID_C016\5&3AC511E3&0&1
    USB Root Hub USB\ROOT_HUB\4&B552DCA&0
    USB Root Hub USB\ROOT_HUB\4&A1A1AA9&0
    USB Root Hub USB\ROOT_HUB\4&31FA8780&0
    USB Root Hub USB\ROOT_HUB\4&1C8B3F0D&0
    USB Root Hub USB\ROOT_HUB20\4&3AE3E82&0

  • 838

    0

    Posted January 9th, 2006 11:00

    I don't know if it is a known issue with the 280's... I hope not, because our Computer services group is about to install about 4000 of these all through our facilities.

    I'm just a user who got his to work :smileysad: