UNSOLVED

Sam pollard

updated

23 years ago

0

17664

September 15th, 2003 15:00

Ghost Imaging

Just wondering i am trying to ghost a gx270 it goes through loading the network drivers starting net bui3 authenticating the administrator mapping a drive ,but when trying to actually load up ghost it just hangs and doesn't go any further.

It works fine with the GX260 but not the 270

I have rebuilt the network disk with the gx270 drivers and tried a different machine. But still to no avail

Any ideas ?

Regards

Sam Pollard

  • MichaelCretired

    2 Intern

    •

    1291 Posts

    912

    0

    Posted September 16th, 2003 12:00

    Sam pollard,

    Thanks for using the Dell Community Forum.

    Can you provide more information on the 270 and the 260.  Are there any differences other than the models such as OS and things like that.  Try to provide as much information as possible including information on your network.

  • Hydralisk00222

    2 Intern

    •

    2440 Posts

    912

    0

    Posted September 16th, 2003 22:00

    Check the OptiPlex - Network forum for ideas.
  • 912

    0

    Posted September 18th, 2003 12:00

    I am using ghost Version 7.5.0.335 with the map a network drive under the ghost boot wizard section.(Floppy disk)

    I have tried using the NDIS2 Network drivers from  the cd that came with the GX270 and also ones downloaded from  intel website(Intel® PRO/1000 MT Quad Port Server adapter Drivers ,DOS, OS/2 Ghost, Imaging, Network disk  from support.intel.com/support/network/adapter/1000/sb/cs-006120-prd749.htm). This appears to be the right network adapter as its the one thats pre-installed with Win xp that dell provide.

    When booting from the GX260 ghost boot disk it finds the network disk goes through logging itself onto the client computer mapping the G drive and then when trying to run ghost.exe it just hangs. If i try going through the ghost wizard and load in the ndis2 drivers it asks for an oemsetup.inf file which we dont have or know wher to get .

    So we have just used the e1000.dos driver that we have .

    When using the boot disk it then it comes up with NDIS2 Environement paremeters are invalid after starting PC dos.

    We have tried copying the gx270 e1000.dos file onto the gx260 ghost boot disk but it still does not boot it just hangs at the same point .

    When checking in manage in computer managemnt and shard folders it does not say the file is in use so it looks as though it is not actually loading the file.

    Anyway the only way we can think of getting around this is to install another network card to make an image.

    Any ideas would be greatly appreciated.

    Regards

    Sam Pollard

    IT Network Administrator

  • jkd740

    7 Posts

    912

    0

    Posted September 24th, 2003 12:00

    You have to use a "-fni" switch for additional parameters.  It's because the chipset is different on the GX270's.  The -fni switch changes how it accesses the hard drive.
  • jkd740

    7 Posts

    912

    0

    Posted September 24th, 2003 15:00

    Solution:

    1. Download PRODOS2.EXE from Intel http://downloadfinder.intel.com/scripts-df/Product_Search.asp?Prod_nm=PRODOS2.EXE
    2. Extract to an empty directory.
    3. Run Ghost Boot Wizard (Network Boot Disk) and choose the Intel Pro1000 template and click the MODIFY button on the left.
    4. Click BROWSE and find the folder that you extracted the ProDos drivers to.
    5. Select the E1000.dos driver and click OPEN.
    6. Click OK.
    7. Click NEXT.
    8. Use PC-DOS or MS-DOS (Your preference ... PC DOS is already selected in most cases unless you want to grab the files from a bootable 98 disk.)
    9. Click Next.
    10. IMPORTANT!!!  In the parameters field type "-fni" without quotes. (Disables IDE Direct Access  on new Intel Chipset)
    11. Click NEXT.
    12. DHCP if you have the server running somewhere or modify for static entries.
    13.The rest is history .. format / create floppy / .etc

     

    - Mike

  • Reggie86

    5 Posts

    912

    0

    Posted September 29th, 2003 20:00

    Dell emailed the following file to correct the problem with Ghost and the GX270.  Not all of the technicians knew about it.  The name of the file is < > .  I had this problem 3 months ago and this resolved it.

    Instructions: Extract the zip to new folder. Copy Ghost.env from you
    console system to a floppy. Copy the new Ghost.exe to the floppy. Boot a
    computer from a dos boot disk, run the Ghost.exe with the Ghost.env file.
    This will register the new Ghost.exe to be used with you license. Replace
    the original ghost.exe file on your console system. You can also replace
    the ghost.exe file on any floppies you have created.

    You should now be able to boot from your drive mapping boot disk and run
    Ghost normally.

  • 912

    0

    Posted September 30th, 2003 07:00

    Reggie,

                 Dont suppose you could email me the file to.

    s.pollard@battens.co.uk

    Regards

    Sam Pollard

  • Reggie86

    5 Posts

    913

    0

    Posted September 30th, 2003 12:00

    OK, I emailed it to you.
  • ksung

    1 Message

    913

    0

    Posted October 13th, 2003 13:00

    Could one of you send me that file too?  ksung@zagat.com

     

    thanks

  • Hydralisk00222

    2 Intern

    •

    2440 Posts

    511

    0

    Posted October 13th, 2003 18:00

    hey, send it over this way too please?

    tankngoliath@optonline.net