UNSOLVED

Nothn2Lose

updated

23 years ago

0

6907

May 2nd, 2004 21:00

DVDROM Doesnt Read Anything

Hey everyone, this is my first post!  I have a Dimension 8300 and my DVDROM does not read DVDs, Audio CDs, or CD-ROMs (like my PowerDVD 4.0 disc).  I have uninstalled and reinstalled the drivers, but nothing worked.  I cant seem to find anything online to give me a suggestion or anything to help me watch some DVDs on my computer....so any feedback from anyone would be more than appreciated, I hope to hear from you all soon, thanks!

  • rps3394

    18 Posts

    948

    0

    Posted May 2nd, 2004 21:00

    Specs -
    Dimension 8300
    System: WinXP
    Drive: NEC DVD+RW ND-1100A
    Disc: Sony CD-RW650

    I flashed the firmware with R59801.exe (version 10GE). Now the drive has quit working altogether!!

    In the Device Manager, I right-click on the drive, choose properties, Drive Status = "This device is working properly."

    However, the drive will not recognize any CD's that I put in. In fact, Windows explorer won't even budge if I click on the drive when the tray is empty (I should get get an error window that says "Please insert a disk into drive E:." However, no such error occurs.)

    Additional "fixes" that I've tried:
    1a. Cleared the NVRAM.
    1b. Re-flashed.
    1c. Cleared the NVRAM again.

    (didn't work)

    2a. Uninstalled the drivers from the Device Manager.
    2b. Reboot, let Windows XP automatically install again.

    (didn't work)

    3a. Opened up the computer.
    3b. Disconnected ribbon cable (#2 connection) from the RW drive. Disconnected the same ribbon cable from the ROM drive (#1 connection) and reconnected to the RW drive. This caused the RW drive to be the "primary" and the ROM drive to be disconnected.
    3c. Booted up. Error in DOS bootup screen tells me it can't find a secondary drive - proceed anyway or go to setup? I choose to proceed anyway.
    3d. Re-flash.
    3e. Re-boot.
    3f. Nothing; shut down computer.
    3g. Open up computer; put cables back to where they were originally.
    3h. Boot up. Primary drive (ROM) works again. RW drive still doesn't work.

    Anyone have any ideas?

    A summary of my symptoms:
    A. Device manager says RW is working ok.
    B. Put disk into RW tray. Click on RW drive from Windows explorer. Right-hand side of explorer indicates the disk is empty.
    C. Remove disk from RW tray; put into ROM tray. Click on ROM drive from Windows explorer. Right-hand side of explorer shows all the files in the root directory of the CD.
    D. Click on RW drive from Windows explorer. Although the tray is now empty, explorer does not give any error messages telling me to insert a disk.
  • 948

    0

    Posted May 2nd, 2004 21:00

    To follow up....my DVDROM is acting similiar to your problem, the Device Manager says it is working properly (but it isnt!!!).....though, when I do put a Disc into the drive, AutoRun doesnt kick in, so I go into My Computer and double-click my D: drive (DVDROM) and it says 'Please Insert a Disc into D: Drive'....er whatever, so it recognizes its there, just doesnt recognize any disc that goes into it.
  • Zachman123

    64 Posts

    948

    0

    Posted May 4th, 2004 20:00

    Same exact problem w/ 1100A... If you have a solution, post it!
  • 948

    0

    Posted May 5th, 2004 13:00

    ttt

     

     

    anyone got any advice?

  • 948

    0

    Posted May 7th, 2004 23:00

    I have a dimension 8300. My dvd drive was working perfectly when i first got it. One day, however, I inserted a dvd into my dvd drive and it made that noise it makes when it starts to spin the disc. It then went silent and nothing happened.  It then continued to make noises every 10 seconds or so. This happens with every cd or dvd i put into it. If i go to my computer and right click the dvd drive icon, 'my computer' stops responding and i have to click end program. If I double click the dvd drive icon, it says 'please insert a disc into drive D: (even though there is already a disc in it.) The device manager also says it is working perfectly (it isn't).

    The dvd drive is a HL-DT-ST DVD-ROM GDR8162B. It does not work. I want to fix it. Someone please tell me how. I would like to know. I want to watch my dvds. Please help us. PLEASE. Should I just get a new one? My computer is still under warranty but I do now know where to go to ask Dell for a new DVD drive that works. Please help me.

  • QoQ

    1 Message

    948

    0

    Posted May 10th, 2004 04:00

    I am having the same problem with my Dimension2400. It just stopped reading DvDs. How come no one is replying??   any suggestions?
  • Loch_ness

    2 Posts

    948

    0

    Posted May 15th, 2004 15:00

    I am having the same problem since I played a DVD yesterday. Got my system in January and I have played hundreds of DVD's since then. Put in one and wham! No more DVD - can't even play my games - cause it says 'insert disc 1' - it's already in there!

    Inspiron 8600

    _NEC DVD+RW ND-5100A

    Is Dell support responding to anyone?

  • 948

    0

    Posted May 15th, 2004 21:00

    I had the same problem with my NEC DVD+RW 1100A. I called Dell Support and they had me do just about everything that has been posted in this topic. Nothing worked. So they are sending me a new drive (I'm still under warranty).

    I also told the technician about the complaints on this board about this issue. He did not know about this Community Forum and I had to direct him to this area. He told me he has had very few complaints about this drive unit. So maybe if we all continue to call Dell Support everyday about this problem maybe they will do something about it.

  • 948

    0

    Posted May 17th, 2004 22:00

    Got my new drive today. It was upgraded to the NEC DVD + RW 2100A. 8x speed instead of 4x. So far so good.
  • Loch_ness

    2 Posts

    124

    0

    Posted May 17th, 2004 23:00

    Yup - same with me. Called support - nothing worked. They are sending me a new drive. The tech support didn't sound at all suprised by my problem, so I suspect this is perhaps a known issue with this drive? Paranoia?